68244867AA 3 Row Aluminum Radiator For 2016-23 Dodge Durango Jeep Grand Cherokee

Price: 164.41 USD

Radiator Configuration: 

-Material: Full Aluminium

-Core Row: 3 Row Core

-Core Size:635mm*528mm*42mm

-Inlet Diameter: 38mm   

-Outlet Diameter: 38mm

-Warranty: 1 Year

Features:

-OE design to ensure exact fit, form and function for an easy drop-in installation;

-Built with high density multi-lowered fins for maximum cooling efficiency;

-Direct Replacement;

-Improve Cooling Efficiency;

-100% Leak Tested;

-Built to strict quality control standards;

The Radiator Fits:

Make	Model	Qualifiers	Year
Dodge	Durango	3.6L V6 3604cc 220ci	2016-2023
Jeep	Grand Cherokee	3.6L V6 3604cc 220ci	2016-2022
Jeep	Grand Cherokee	3.0L V6 2987cc 182ci	2016-2021

NOTE:

-Please Check The Dimensions Above Carefully Before You Buy!

-No Fitting Instructions Supplied!

-Full Aluminum High Performance.

-Full set in box and 100% brand new.

-Professional Installation is Highly Recommended!

-All our products are 100% fully tested to ensure top quality.

-We guaranty that all our products are made of the best materials and advanced manufacture technique.

How to replace the radiator:

1. Disconnect the battery.

2. Drain the radiator fluid into a suitable container.

3. Remove the old radiator:

-Take off any plastic covers around the radiator.

-Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.

-Disconnect the radiator hoses from the radiator.

-Remove any clamps, brackets, or screws holding the radiator inside its frame.

-Lift the radiator up and out of the car.

4. Install the new radiator:

-Slide the new radiator into place.

-Connect any clamps or brackets that hold the radiator in place.

-Connect the engine cooling hoses to the radiator.

-Replace the fan and fan shroud.

-Reconnect the fan electrical connection.

-Replace the plastic covers.

5. After loading the product on your vehicle  and adding the coolant, tighten the rotary cover and leave your vehicle idling for 10-20 minutes. After completely cooling the coolant, open the cover and fill the product with coolant. Please make sure there is no gas in the product.

6. Check your work to make sure that there are no leaks.

(Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)

Note: Do please keep children and pets away when replacing the radiator)

 

How to clean radiator:

1. Start the vehicle, to rise to normal temperature. Slowly open the tank cover, the fluid shake from the tank after filling the mouth, the cleaner can be mixed with any brand of coolant. Idle running not less than 15 minutes, not cleaning vehicles not less than 30 minutes for two years. And then discharge coolant, flush water tank, until out of clear water, suitable for any water cycle system.

2. After cleaning, after waiting for pipeline rehabilitation add fluid to water tank, and inject new coolant and water purification.