Cutlass Front Lift Shocks for G Body 78-88 Monte Carlo Regal Grand Am Prix

Price: 139.00 USD

Cutlass extended front lift shocks for your 78-88 G Body lift kit project

Are you planning on putting a lift in the front of your 78-88 G Body? These extended Cutlass front lift shocks fit all 78-88 Chevy G Body platform cars and are a necessity when lifting the front of this car. 

These extended front lift shocks fit the following vehicles from 1978 to 1988: Oldsmobile Cutlass, Buick Regal, Chevy El Camino, Chevy Monte Carlo, 78-81 Buick Century, 78-83 Chevy Malibu, 82-86 Pontiac Bonneville, 78-80 Pontiac Grand Am, 78-87 Pontiac Grand Prix, 78-81 Pontiac Lemans, and 78-87 GMC Caballero. See fitment table below for a full list of applications. 

The front lift shocks are a bolt-on design and are specifically designed for cars running lift springs or lift cups.

Why do I need longer Cutlass front lift shocks when lifting my car?

When lifting the front and rear of your car, the stock shock absorbers are not long enough to provide proper operation. The shocks will often bottom out on bumps in the road and cause an unusually harsh ride. This can make your car ride poorly and experience handling issues as well.

When raising the suspension, UCL front lift shocks will give you the extra travel you need to ride right. Our shocks are designed for lifts ranging from 3 inches up to 7 inches. The shocks simply bolt in place of your original units.

Quite often your factory shocks are already in poor condition and adding a lift will only make the problem worse. Do the job right and install longer G Body extended shocks for your car lifting project.

How are UCL’s Cutlass front lift shocks different from others?

Our shocks are gas charged and feature a twin tube design for optimal ride handling. Compared with the factory liquid filled units, UCL twin tube gas charged shocks are a significant improvement.

All of our shocks use a proprietary blend of nitrogen infused gas with a specially designed piston shape to optimize your lifted car ride quality. The nitrogen blend reduces foaming and aeration common in older vehicles worn out shock absorber designs. The special design of the hydraulic piston absorbs and dissipates vibrations for the best in ride quality and handling.

Durable black powder coating lasts 100x longer than spray painted parts

When choosing extended Cutlass front lift shocks for your car lift project, be sure to note the finish on the parts. All of Universal Car Lifts parts feature a durable black powder coat finish. We start by cleaning the raw metal parts with a degreaser solution to facilitate a permanent finish bonding. The parts are then sent through a large oven and heated to encourage off gassing. This uniformly bakes off any impurities from the parts.

After pretreating the parts in an oven, the Cutlass front lift shocks are professionally sprayed with a high end powder coat gun in a clean room spray booth. The shocks are then sent back through the oven where they bake at the proper temperature to obtain a permanent bond.

This powder coat technique is the same method that new car manufacturers use to ensure their parts last virtually forever. It prevents rust from forming on the parts which will weaken the steel and cause premature failure.

Beware of “knock-off brand” sellers who use cheap hardware store spray paint to finish their parts. The finish will look like crap and the parts will almost immediately rust. The corrosion will eventually cause the parts to fail and could cause your rear end to fall out of your car.

Insist on genuine UCL Cutlass front lift shocks for your project. We have been manufacturing car lifts longer than anyone else and have more cars running our lifts than anyone else.

We beat all competitors prices on identical products

UCL is the largest manufacturer of car lift products in the world. We are confident our products are the best quality at the best prices. If you find a better price on an identical product, we will gladly beat it. Contact us directly via message or phone for more information. UCL has lifted more cars than anyone else and was the first company to offer car lift kits. Our customers have been riding high on our products for over 15 years.

Lifetime warranty, installation videos and extended technical support hours

UCL offers a lifetime warranty on every component we manufacture. We don’t expect you to use the warranty as we build our parts right the first time, so you won’t need to replace things later on. If the product fails just let us know and we will immediately send you a replacement free of charge.

Getting your Cutlass front lift shocks installed quickly and trouble free on your 78-88 G Body is important. For this reason, we include an installation DVD that shows step-by-step how to install your products. We also include a printed installation manual.

We want your installation to be effortless. That is why we have experienced technicians on staff extended hours to make sure everything goes smoothly. Our technicians work set business hours and are easily reachable via email, messaging and phone. To contact us, simply click the “Contact Seller” option and then click “Other”. You should see our number listed. You can also look us up online.

Recent Feedback

floridaboylifts

Great price fast shipping

---

klaneal

Shipping speed was great

---

tyrone4397

Fast shipping good item thanks

---

Fitment Guide

Make	Model	Years
BUICK	REGAL	1978-1988
BUICK	CENTURY	1978-1981
CHEVY	ELCAMINO	1978-1988
CHEVY	MALIBU	1978-1983
CHEVY	MONTE CARLO	1978-1988
OLDSMOBILE	CUTLASS	1978-1988
OLDSMOBILE	CUTLASS SUPREME	1978-1988
PONTIAC	BONNEVILLE	1982-1986
PONTIAC	GRAND AM	1978-1980
PONTIAC	GRAND PRIX	1978-1987
PONTIAC	LEMANS	1978-1981
GMC	CABALLERO	1978-1987