QA1 GS502-15325 Front Coil-Over System | Single Adjustable Shocks & 325# Springs

Price: 713.95 USD

Application: 1993-2002 GM F-Body – Camaro & Firebird

Part# Q-GS502-15325

Easy Bolt-In Installation!

Remove the existing front shocks and coil springs and the QA1 Pro Coil System bolts right in. This kit is a simple bolt in installation with the use of basic hand tools.

Specially Designed Conical Coil Springs

These springs are designed so that the lower end sits on the coil-over shock’s adjustable spring seat and the upper end sits in the original spring pocket in the k-member. This allows for the use of a longer and lighter spring for more stored energy, offering increased weight transfer. Greater durability is also achieved by locating the spring pressure in the k-member and not on a single stud.

Single Adjustable Shocks

Aluminum shocks with 18 positions of simultaneous compression and rebound adjustment using one easy to reach knob with plus and minus symbols for ease of adjustment.

Ride Height Adjustable

The threaded aluminum shock body allows for easy on-the-vehicle ride height adjustments.

The QA1 Pro Coil System Includes:

• (2) QA1 Proma Star 18 way single adjustable front coil-over shocks.
• (2) Conical coil springs.
• All required mounting hardware.

Spring Rates: 

This kit includes 325# springs. Look at the available spring rates and their applications below. If you would like a different spring rate then copy the kit part number and paste it into the search field in our eBay Store to order the kit with your desired spring rate. The spring rate chart below is a general guideline. The best spring rate will vary depending on your application, usage, and personal preference.

 

Related Products:

QA1 18 Way Single Adjustable Rear Shocks: You can purchase these by searching for Part# TS704 in our eBay Store.

Spanner Wrenches & Torrington Thrust Washers/Roller Bearings Kit: This kit will provide you with the spanner wrenches you need to make ride height adjustments, along with the thrust washers and needle roller bearings to place on to the coil spring base to prevent spring bind and make for easy ride height adjustments. You can purchase this by searching for Part# 7888-110 in our eBay Store.

Torrington Thrust Washers/Roller Bearings Only: This kit will provide you with the thrust washers and needle roller bearings to place on to the coil spring base to prevent spring bind and make for easy ride height adjustments. You can purchase this by searching for Part# 7888-109 in our eBay Store.

Spanner Wrenches Only: This kit will provide you with the spanner wrenches you need to make ride height adjustments. You can purchase this by searching for Part# SPI-T114W in our eBay Store.