PLEASE READ COMPLETELY BEFORE PURCHASING
(I [as the seller] am not responsible for buyers not reading the details of this listing before purchasing)
Review 2nd image of this listing for current Lead Time (shipping) for this product
Nu-Relics / 1 Pair Window Regulator and Motors (with Nu-Crank Switches & Harness)
1978 to 1983 GM A & G Body for 4 Door and Wagons (front door only)
(Nu-Crank 214 Switches has GM Large Round Spline with Short (0.75″) Shaft for thinner door panels)
This listing is ‘Made to Order‘ and ships directly from the manufacturer (view 2nd image for current lead time)
NOTES:
1) First Image on the listing is only for reference use only (this listing is for both front doors)
2) Please Review 2nd Image for Current Lead and Handling Time for this Listing
3) Please Read and Review “Important Notice” Below in this Listing before purchasing
4) Contact me anytime if you have any questions or concerns
////////////////////////////////////////////////////////////////////////////////////////////////////
Make & Model Fitment: for Rear Wheel Drive Cars Only
This is for the Front Doors Only – This kit DOES NOT control Vent or Quarter Windows
1978 to 1981 Buick Century 4 Door (plus all 4 door sub-models)
1978 to 1981 Buick Century Wagon (plus all wagon sub-models)
1982 to 1984 Buick Regal 4 Door (plus all 4 door sub-models)
1982 to 1983 Buick Regal Wagon (plus all wagon sub-models)
1978 to 1983 Chevrolet Malibu 4 Door (plus all 4 door sub-models)
1978 to 1983 Chevrolet Malibu Wagon (plus all wagon sub-models)
1980 to 1981 Oldsmobile Cutlass 4 Door (plus all 4 door sub-models)
1978 to 1979 Oldsmobile Cutlass Wagon (plus all wagon sub-models)
1980 to 1983 Oldsmobile Cutlass Cruiser Wagon (plus all wagon sub-models)
1978 to 1980 Oldsmobile Cutlass Salon 4 Door (plus all 4 door sub-models)
1980 to 1983 Oldsmobile Cutlass Supreme 4 Door (plus all 4 door sub-models)
1982 to 1983 Pontiac Bonneville 4 Door (plus all 4 door sub-models)
1982 to 1983 Pontiac Bonneville Wagon (plus all wagon sub-models)
1978 to 1979 Pontiac Grand Am 4 Door (plus all 4 door sub-models)
1978 to 1983 Pontiac Grand Le Mans 4 Door (plus all 4 door sub-models)
1978 to 1981 Pontiac Grand Le Mans Wagon (plus all wagon sub-models)
1978 to 1981 Pontiac Le Mans 4 Door (plus all 4 door sub-models)
1978 to 1981 Pontiac Le Mans Wagon (plus all wagon sub-models)
Kits for 1978 to 1988 GM A & G Body 2 Door – Please Visit my eBay Store
May fit the following Models and Years: but has not been confirmed
1984 Buick Regal 4 Door (has not been confirmed)
1984 to 1987 Oldsmobile Cutlass Supreme 4 Door (has not been confirmed)
1984 to 1986 Pontiac Bonneville 4 Door (has not been confirmed)
Manufacturer: Nu-Relics
Category: Interior, Window Regulator / Window Motor
Location: Front Driver Door & Front Passenger Door (mounting hardware & instructions are included)
Manufacturer Part #: 47860-214 (sold in pair – one drive side & one passenger side)
Wire Harness Option: Harness included – 2 Independent Door Harnesses (1 door harness for each Nu-Crank switch)
Window Switch(es): 2 Nu-Crank Switches with GM Large Round Spline & Short (0.75″) Shaft (please visit my store for more options)
Window Switch Location: Door Mount (manual hand crank handles required – not included)
What’s in the box:
> 2 Regulators (left & right side)
> 2 New ACI Motors (left & right side)
> 2 Nu-Crank Switches (left & right side – door mount)
> 2 Independent Door Harnesses (left & right side)
> 2 Wire Conduit (for the door harness)
> Instructions
Tech Specs:
ACI Motors with No Load Amperage: 3 Amps
ACI Motors with Low Load Amperage: 5 Amps
ACI Motors with High Load Amperage: 11 Amps
ACI Motors Stall Amperage: 20 Amps
ACI Motors are Reverse Polarity:
This means that the ground for the system must come out of the master switch. There are 2 poles on the motor – to make it operate, you must put power to one side and ground on the other side (NOT the motor’s case). This will result in the motor turning in one direction. By swapping the wires from side to side, the direction will change
Fuses or Circuit Breakers – 30 Amps:
Most of Nu-Relics harnesses will come with an in-line 30 Amp fuse. If you prefer, a circuit breaker will work too. You can hook your windows up to a variety of different power sources
Powering Wire Options:
> Straight to the battery (windows should not have any battery draw when not in use)
> Extra slot on the fuse panel (tie in using supplied fuse)
> Pull power from a switched power source (make sure this power source will not overload by adding this kit)
Relays:
In most cases, you will not need to use a relay to boost amperage to the motors. The switches and wiring Nu-Relics uses can handle the amp draws
Grease & Oil:
> On the regulator gear teeth & roller tracks, Nu-Relics recommend using high temp automotive wheel and chassis lubricant
> Avoid the older soap bases lithium grease (it sets up hard in cold weather making window harder to move)
> A few drops of light weight oil in the pivot points will allow the bronze Oilite® bushings to work smoothly and reduce wear
> On fuzzy runs and weather stripping. some 3M Silicone spray can help break in
> Use Die-Electric grease or Tuner Lube on all terminals and connections. This helps prevent & protects against moisture and corrosion
Notes:
The front door regulator mounts into the original power regulator mounting holes. Picture included in the kit for assist with location
The kit’s ACI motors are reverse polarity motors and require reverse polarity switches. Reverse polarity means that the ground is within the wiring harness rather than off the motor. The easiest way to determine if you have a reverse polarity switches is to look at the number of poles on the back of a single switch. You must have 5 or more poles to have reverse polarity switch.
Contact Me: If you have questions about Nu-Relics products. If Nu-Relics makes it, I can get it for you
Important Notice: By purchasing this Nu-Relics product(s), buyer has agreed to the following return policy
1) The product(s) must be in new and unaltered condition (original packaging and NEW Condition)
2) Customer agrees to a 20% restocking fee (product cost only, shipping cost excluded on restocking fee)
3) Original shipping charges are non-refundable
4) Refunds are issued only after product(s) is returned and pass inspection
5) Product(s) with any manufacturer’s defects, contact me immediately (any alternation are not returnable)
6) Customer has read and agreed to this listing’s description in full (seller is not responsible for buyers (customers) not completely reading and/or understanding this description in full, contact me if you have any questions)
////////////////////////////////////////////////////////////////////////////////////////////////////
Feel free to contact me if you have any questions
Follow me on Instagram & Facebook
@ClassictoModernMuscleCars
The following shipping service is available in the United States
(Yes, this includes: Hawai’i, Alaska, Puerto Rico & All U.S. Territories)
Shipping and Handling on this Listing
> > > UPS Ground < < <
UPS Tracking is provided with all packages on this listing. Tracking updates are also on the UPS Website, this will include the date and time of delivery or attempted delivery
We DO NOT ship to USPS PO Boxes on this Listing
Please make payment within 7 days after your purchase. If payment is not received after the 7 days from the date of purchase. I will need to report this to eBay as an unpaid item.
I CAN NOT combine shipping on this listing with other product in my New Hampshire Warehouse
///////////////////////////////////////////////////////////////////////////////////////////////////
Message from Nu-Relics to you (the customers) …
Looking for top quality dependable power windows for your Classic Cars, Classic Trucks, Muscle Cars, Street Rod or Hot Rod? Nu-Relics Power Windows, LLC manufactures direct bolt in gear driven windows for classic vehicles. The power window conversion kits are truly make and model specific – designed for the regulator to work like the original manual with correct bolt patterns and arm lengths. Installation is easy – unbolt the manual regulator. Reverse the process and bolt in the power regulator in the exact same location. Nu-Relics Power Window, LLC hot Rod Electric Window Kit is available for vehicles from 1928 to 1948. Muscle Cars and Classic Cars Power Window conversion kits are available for Tri-Fives, Camaros, Chevelles, Mustangs, Novas, Impalas, Cudas, Challengers and much more.
Nu-Relics Power Window Kits for Classic Cars and Hot Rods provide some great features such as:
> The kits are available with various switch options. We have 3 styles of chrome switches, black illuminated switches and Nu-Cranks that allow your original crank handle to operate as a power switch. We also have a kit that does not include wiring and switches for customers that want a different style of switch.
> Kits include: regulators, motor, optional choice of completed wire harness with switches of choice, conduit to protect the wires going thru the door. Each product page includes pictures of all parts included in the kits.
> Works with curved glass
> Regulators are constructed of durable components (treated gear plates, 1018 cold rolled steel, Bronze Oilite® thrust bearings at pivot, etc.
> Lifetime warranty against manufacturer’s defects on the regulator, motors and switches purchased from Nu-Relics Power Windows, LLC
////////////////////////////////////////////////////////////////////////////////////////////////////
Warranty – Returns – Cancellation – Refund Policies…
Manufacturer’s Warranty…
Please Read Completely & Carefully. By purchasing any item from this seller (Classic to Modern Muscle Cars, LLC) you have affectedly accepted all terms & conditions, Warranty & Return policies Above and Below on this listing.
All good are covered by their manufacturer’s warranty. Classic to Modern Muscle Cars, LLC DOES NOT sell or offer warranty on any goods other than the manufacturer’s warranty. All warranty claims must be made before the parts are installed. Due to the nature of their use, race parts are not covered by warranty once they have been used. When it has been determined the part(s) is defective, we will either replace or send you a refund. No refund will be given on shipping charges, installations and/or removal of the parts.
Due to the fact that there are many variables when installing auto parts. Classic to Modern Muscle Cars, LLC will not be held liable or responsible for any consequential and/or incidental damages and/or injuries incurred during product(s) installations and will not be held liable or responsible for any charges on any product that are defective, does not fit, are damaged and/or ordered/shipped incorrectly.
At some point, you may have product(s) that needs to be returned. It may be an item you do not need, or it may be something you bought in error or damage goods. In any event, you want to return the product for credit. We routinely process several returns every day. To ensure that the product(s) get quickly processed and credited, please follow the following steps below. We will be happy to make sure your returns are properly credited.
Return Instruction (please read completely):
1) Contact us before returning any product to us or the manufacturer. Request RGA (Returned Goods Authorization) number for the product(s) you wish to return. All product(s) to be returned must be accompanied by a RGA number and be in its original packaging. The product(s) must be unused, unaltered and unchanged from its original state. Any product(s) returned that DOES NOT meet these criteria (failed return inspection) may be subjected to additional handling fees or refusal. The product must return in a re-saleable condition (as new, not used condition). If product(s) fails return inspection, refund will be denied. This product(s) is yours and you will need to pay additional shipping cost to be returned to you again. Any product(s) left abandon for 30 days after a failed returned inspection will be discarded. If you are unsure if the product(s) will not pass or fail return inspection. Contact us and send us images to help you will the return process.
2) Pack the product(s) carefully to avoid any damages during shipping. Always use a sturdy shipping carton to ship the product(s) back. Print your RGA number on the outside of the shipping carton. Please DO NOT write on, use tape and/or affix shipping labels to the product(s) packages itself, product(s) must return to stock and we cannot sell product with a defaced packaging. Return shipping fees are at the customer’s expense and no refund on shipping cost to and from the customer.
3) You will need to send me the invoice number or better yet, a copy of the original invoice showing when the product(s) was purchased. Please include this information with the merchandise you are returning. Returns will be assessed a 20% Restocking Fee for Nu-Relics product(s) (depending on the manufacturer restocking fees may vary, contact me for more details on each manufacturer’s restocking fees). We are very sorry, but we CAN NOT accept returns on special orders and/or non-stocking product(s) and/or wheels that had tires mounted.
4) Falsifying any claims on eBay will result in the buyer being reported for abuse of policies, terms and conditions. Returns and/or exchanges and/or warranty and/or buyers protection possibly be voided and/or denied.
Cancellation…
1) Cancellation must be made before your order is marked shipped (contact me right away once you want to cancel your order)
2) Once an item is marked as shipped, it cannot be cancelled (must wait for the package to arrive to request a return)
3) All refusals of shipment will have a $25.00 handling charge and all applicable freight/shipping and 20% restocking fess will be charged to the customer
Please inspect your package(s)…
1) Inspect your package for any damages and/or missing product(s). Please inform delivery drive and contact me IMMEDIATELY if any product(s) are damage due to shipping. Any damage product(s) from shipping and/or manufacturers defect will not incur any fees to the customer.
2) All refusals of shipment will have a $25.00 handling charge and all applicable freight/shipping and 20% restocking fees will be charged to the customer.
Shipping…
Purchases made with customer’s error and/or remorse on product(s) stating “FREE SHIPPING” and is returned (must past return inspection) will receive a partial refund minus of any and all shipping cost to and from the customer. If the product(s) DOES NOT past inspection, please review “Return Instruction number 1 (one)” return rule above. The product(s) must b return in re-saleable condition (as new. not used condition). If product(s) fails return inspection, refunds will be denied. This product(s) is yours and you will need to pay additional shipping cost to be returned to you again. Any product(s) left for 30 days after a failed returned inspection will be discarded. If you are unsure if the product will not pass or fail return inspection. Contact us and send us images to help you will the return process.
I may, at any time and at my sole discretion, modify these Terms and Conditions of use. Including our private policy with or without notice to the user. Any such modifications will be effective upon public posting. Your continued use of my services and this store following any modification constitutes your acceptance of these modified terms.
I use all three major shipping companies here in the United States. FedEx, UPS and USPS. Not all product(s) can use just one shipping method due to size, weight and/or origin of the product. Product(s) may be dropped shipped from overseas location. I am located in Southern New Hampshire in the New England. Just over an hour North-West of Boston, MA. I do not have a location open to the public as of yet.
Manufacturer’s Defects…
Unfortunately, as much as each manufacturer does everything, they can to bring you the best product(s) they can offer, manufacturer’s defects do happen. We all hope those parts will never find their way onto our projects. But when they do, what to do if one of these defects find its way to you. While those parts will be replaced, there is a process. Since I do not offer warranty other than the manufacturer’s warranty. Each manufacturer has a specific way on how they process defect exchanges. Each manufacturer’s defect case is handled uniquely to each case. As much as we try to streamline it. Sometimes this does not go as plan. Please try to follow and understand the next few steps to ensure the defective product(s) is exchanged as smoothly as possible.
1) If you have manufacturer’s defect product(s), please document the defect by taking pictures and/or video and/or taking notes.
2) Contact us with the issue/defect and try your best to explain the defect as soon as possible. Also send pictures, video and/or notes you have taken.
3) Not every return/exchange needs to have a case open (cases are mostly for when you have no communication between the buyer and seller)
4) I will need to bring these defects to the manufacturer’s attention. This may take from moments to a day or two for the manufacturer to reply to the claim of ‘Manufacturer’s Defect’. Each manufacturer has an investigation process, it can only go as fast as manufacturer process these claims.
5) I will communicate with you on each step the manufacturer brings to my attention. Sometimes this may take a few messages from me to the buyer and/or a few messages from me to the manufacturer. While some manufacturers prefer you to contact them directly with defect claims, other manufacturers prefer you work with the retailer you purchase your product(s) with.
6) If you choose to work directly with the manufacturer with your claim. I can not be held liable or responsible with the manufacturer’s actions or conclusions of your claim(s) since I have been taken out of the loop of communication. You will need to complete the entire claim with the manufacturer.
The steps above are just a few guides to help with exchanging or returning of a manufacturer’s defects. Not all manufacturer process cases the same, the process can go very smoothly while other may not. Your patience will be very grateful.
I take pride…
I take pride in my company and will work with each customer and your individual needs. I understand each customer is looking for the right product(s) for their ride. And I want to make this happen. Is important to me everyone is happy with their purchase and it is why the rules and policies are set to protect us both. Please if you have any questions and/or concerns. Do not hesitate to contact me anytime and I will do everything I can to make sure you receive what you are looking for. Please take your time on large purchases. You work very hard for your money.
Copyright © 2024 by Classic to Modern Muscle Cars, LLC (Limited Liability Company)
Published 2020 of January 1st @ 0001 EST (12:01 am) – Updated 2024 of May 31st @0001 EST (00:01 am)
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov 
