Tag: force

G Force RCG-6L80 Transmission Crossmember, 84-88 G-Body, GM-6

Sku # 64084886

Mfr. Part # RCG-6L80

This generation of vehicle is prone to body bushing compression, even with some southern vehicles. If the floor pan is too close to allow installation, it may be necessary to replace the body bushings. Some customers have reported that with slight interference instances, they have been able to gently lift the floor pan with the assist of a floor jack and a wood cushion, thus providing the required clearance for installation. On all 78-88 G body crossmembers, the passenger side hump is the taller of the two, and on some installations, it is necessary to remove the catalytic converter heat shield from the passenger side floor pan.

• Fits 1984-1988 G-Body
• Crossmember is installed so that the exhaust clearance humps are closed on the top and open on the bottom
• On all 84-88 G body crossmembers, the passenger side hump is the taller of the two.
• On some installations, it is necessary to remove the catalytic converter heat shield from the passenger side floor pan.
• This generation of vehicle is prone to body bushing compression, even with some southern vehicles. If the floor pan is too close to allow installation, it may be necessary to replace the body bushings. Some customers have reported that with slight interference instances, they have been able to gently lift the floor pan with the assist of a floor jack and a wood cushion, thus providing the required clearance for installation.
• The crossmember is installed so that the exhaust clearance humps are closed on the top and open on the bottom.
• The primary frame change on this generation of vehicles is beginning with 1984 models and the implementation of the 2004R transmission which required positioning the crossmember further to the rear of the vehicle. This is evidenced by 2 sets of frame holes for the crossmember on the driver side of the vehicle. G force has developed the frame extension (FE-100) to duplicate this longer frame on the early generation vehicles.

This Part Fits

Since different transmissions can share the same overall lengths as well as other measurements, they can also share some transmission crossmembers. G-Force has grouped the transmissions together that can share the same crossmember.

This Crossmember fits the GM-6 Transmission Group:

• Hydra-Matic 6L80 transmission (6L80E) – Slip Yoke
• Hydra-Matic 6L90 transmission (6L90E) – Slip Yoke

Finish

Black powdercoated

Transmission Mount Included

No

Notes

Please note that G-Force crossmembers do not include the G-Force logo sticker as shown in the picture. This decal is shown for brand reference only.

G Force RCG-T56 Transmission Crossmember, 1984-1988 G-Body, GM-5

Sku # 64084885

Mfr. Part # RCS10B-700

This generation of vehicle is prone to body bushing compression, even with some southern vehicles. If the floor pan is too close to allow installation, it may be necessary to replace the body bushings. Some customers have reported that with slight interference instances, they have been able to gently lift the floor pan with the assist of a floor jack and a wood cushion, thus providing the required clearance for installation. On all 78-88 G body crossmembers, the passenger side hump is the taller of the two, and on some installations, it is necessary to remove the catalytic converter heat shield from the passenger side floor pan.

• Fits 1984-1988 G-Body
• Black powder coat finish

This Part Fits

Since different transmissions can share the same overall lengths as well as other measurements, they can also share some transmission crossmembers. G-Force has grouped the transmissions together that can share the same crossmember.

This Crossmember fits the GM-5 Transmission Group:

• Borg-Warner T-56 transmission
• Tremec T-56 transmission
• Tremec Magnum 11009 6-spd
• Tremec Magnum 11010 6-spd
• Tremec Magnum 11011 6-spd
• Tremec Magnum 11012 6-spd
• Tremec Magnum XL #12019 6-spd
• Tremec Magnum XL #12021 6-spd

Notes

Please note that G-Force crossmembers do not include the G-Force logo sticker as shown in the picture. This decal is shown for brand reference only.

G Force RCG-400 Transmission Crossmember, 1984-1988 G-Body, GM-3

Sku # 64084883

Mfr. Part # RCG-400

This generation of vehicle is prone to body bushing compression, even with some southern vehicles. If the floor pan is too close to allow installation, it may be necessary to replace the body bushings. Some customers have reported that with slight interference instances, they have been able to gently lift the floor pan with the assist of a floor jack and a wood cushion, thus providing the required clearance for installation. On all 78-88 G body crossmembers, the passenger side hump is the taller of the two, and on some installations, it is necessary to remove the catalytic converter heat shield from the passenger side floor pan.

• Fits 1984-1988 G-Body
• Bolts to the rear set of frame holes on drivers side frame rail

This Part Fits

Since different transmissions can share the same overall lengths as well as other measurements, they can also share some transmission crossmembers. G-Force has grouped the transmissions together that can share the same crossmember.

This Crossmember fits the GM-3 Transmission Group:

• Turbo Hydra-Matic 2004R (TH2004R)
• Turbo Hydra-Matic 400 (TH400)
• Turbo Hydra-Matic 375 (TH375)

Notes

Please note that G-Force crossmembers do not include the G-Force logo sticker as shown in the picture. This decal is shown for brand reference only.

Great product!!!!! Great fit!!!!!

Summary: Fit great. Easy bolt in installation.

Yes, I recommend this product.

Fit great!

Summary: Fit great – a bit of loose weld slag trapped in the tubing but don’t think it will hurt anything. Just can hear it rattling around a bit

Yes, I recommend this product.

G Force RCG-4L80 Transmission Crossmember, 1984-1988 G-Body, GM-4

Sku # 64084884

Mfr. Part # RCG-4L80

This generation of vehicle is prone to body bushing compression, even with some southern vehicles. If the floor pan is too close to allow installation, it may be necessary to replace the body bushings. Some customers have reported that with slight interference instances, they have been able to gently lift the floor pan with the assist of a floor jack and a wood cushion, thus providing the required clearance for installation. On all 78-88 G body crossmembers, the passenger side hump is the taller of the two, and on some installations, it is necessary to remove the catalytic converter heat shield from the passenger side floor pan.

• Fits 1984-1988 G-Body
• Crossmember is installed so that the exhaust clearance humps are closed on the top and open on the bottom

This Part Fits

Since different transmissions can share the same overall lengths as well as other measurements, they can also share some transmission crossmembers. G-Force has grouped the transmissions together that can share the same crossmember.

This Crossmember fits the GM-4 Transmission Group:

• Hydra-Matic 4L80 transmission
• Hydra-Matic 4L80-E transmission
• Hydra-Matic 4L85 transmission
• Hydra-Matic 4L85-E transmission

Notes

Please note that G-Force crossmembers do not include the G-Force logo sticker as shown in the picture. This decal is shown for brand reference only.

Nice piece.. well built. Dont buy the cheaper ones

Summary: Fit right in… 83 and prior remember to buy the extention.

Yes, I recommend this product.

G Force RCG-350 Transmission Crossmember, 1978-1988 G-Body, GM-1

Sku # 64078831

Mfr. Part # RCG-350

This generation of vehicle is prone to body bushing compression, even with some southern vehicles. If the floor pan is too close to allow installation, it may be necessary to replace the body bushings. Some customers have reported that with slight interference instances, they have been able to gently lift the floor pan with the assist of a floor jack and a wood cushion, thus providing the required clearance for installation. On all 78-88 G body crossmembers, the passenger side hump is the taller of the two, and on some installations, it is necessary to remove the catalytic converter heat shield from the passenger side floor pan.

• Fits 1978-1983 G-Body
• Crossmember is installed so that the exhaust clearance humps are closed on the top and open on the bottom

This Part Fits

Since different transmissions can share the same overall lengths as well as other measurements, they can also share some transmission crossmembers. G-Force has grouped the transmissions together that can share the same crossmember.

This Crossmember fits the GM-1 Transmission Group:

• Turbo Hydra-Matic 350 (TH350)
• Turbo Hydra-Matic 200 (TH200)
• Turbo Hydra-Matic 250 (TH250)
• Muncie transmission
• Muncie M-21 transmission
• Muncie M-20 transmission
• Muncie M-22 transmission
• Borg-Warner T-10 (AS-3)
• Borg-Warner T-10 (Super T10)
• Borg-Warner T-10 transmission
• Borg-Warner T-10 transmission
• Borg-Warner T-10 transmission
• Richmond/Borg-Warner Super T10
• Saginaw transmission
• Saginaw transmission
• Saginaw transmission
• Powerglide transmission

Notes

Please note that G-Force crossmembers do not include the G-Force logo sticker as shown in the picture. This decal is shown for brand reference only.

Do yourself a favor and get one of these!

Summary: This unit is heavy duty. Great looking welds and nicely coated. Slide it into place and dropped the bolts right in the holes; perfect fit with a little wiggle room for adjustment. I like it!

Cons: No cons. This thing is better than sliced bread

Yes, I recommend this product.

Would buy again

Summary: Heavy and strong. Fit great

Yes, I recommend this product.

Would recommend

Summary: Perfect finishing touch for the Gbody.

Yes, I recommend this product.

Yes

Summary: Worked out great, needs a diff mount to use with a turbo 350 trans.

Yes, I recommend this product.