Posted on Leave a comment

Qty Of 2 Proforged 101-10019 Front Upper Ball Joints GM BUICK G BODY MONTE CARLO

Qty Of 2 Proforged 101-10019 Front Upper Ball Joints GM BUICK G BODY MONTE CARLO
item image
 Buy Now
Facebook Twitter Pinterest

Price: 80.00 USD

Qty Of 2 Proforged 101-10019 Front Upper Ball Joints GM BUICK G BODY MONTE CARLO

QTY of 2 Proforged Standard 101-10019 Front Upper Ball Joint.

SHIPPING IS AN ESTIMATE IF LESS, BUYER WILL BE REFUNDED THE DIFFERENCE.

Brand new, never used. These ball joints came installed on some UMI Performance upper A Arms. I purchased brand new direct from UMI Performance and were swapped for taller ball joints.

These were purchased for a 1987 Buick GrandNational. I believe they fit other G body and General Motors cars.

Item specifics

Condition
New other (see details): A new, unused item with absolutely no signs of wear. The item may be …
Brand
Proforged
Warranty
Yes
Manufacturer Part Number
101-10019
Placement on Vehicle
Front

Posted on Leave a comment

Wilwood 140-14419-D Dynalite Front Drag Brake Kit Drilled Gray 80-87 GM G” Body

Wilwood 140-14419-D Dynalite Front Drag Brake Kit Drilled Gray 80-87 GM G” Body
item image
 Buy Now
Facebook Twitter Pinterest

Price: 1,017.24 USD

Wilwood 140-14419-D Dynalite Front Drag Brake Kit Drilled Gray 80-87 GM G” Body

Wilwood 140-14419-D Dynalite Front Drag Brake Kit, Drilled Dynamic Rotor-Anodized Gray 80-87 GM G-in Body *** Wilwood’s FDL Front Drag Brake Kits with Hats are drag racing’s most popular front brake kits. FDL kits are available for the popular Import car spindles or front struts used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Billet Forged Dynalite four-piston calipers mount directly to the spindle with a bolt-on bracket. Forged Hats with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include attachment hardware, brake pads, and instructions. Requires Wilwood Flexline Brake Lines, sold separately.

Item specifics

Condition
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
Brand
Wilwood
Placement on Vehicle
Front
Manufacturer Part Number
WIL-140-14419-D

Posted on Leave a comment

BMR 78-87 G-Body Front Reinforcement Chassis Brace Red FOR 1978-87 Buick Regal

BMR 78-87 G-Body Front Reinforcement Chassis Brace Red FOR 1978-87 Buick Regal
item image
 Buy Now
Facebook Twitter Pinterest

Price: 301.43 USD

BMR 78-87 G-Body Front Reinforcement Chassis Brace Red FOR 1978-87 Buick Regal

SHIPPING POLICY

The handling time for most in-stock items is 1-2 business days. However, some items may have a longer handling time, such as special order items or items that are currently out of stock.

If you select overnight shipping, your order will be shipped as soon as it is ready to ship, but the handling time will still apply. This means that your order may not arrive overnight, depending on the handling time for the item.

To see the handling time for an item, click the Shipping, returns & Payments tab above the item’s specifications. This will show you the handling time for the item before any shipment will commence.

  • Shipping Times
    • Most in-stock items will ship within one business day of cleared payment.
    • Special order items will have a minimum handling time of 10 business days.
    • International shipping time varies based on the shipping method, the country you are located in, and any unforeseen Customs delays.
  • Shipping Locations
    • We ship to the United States and most international countries.
    • We ship from warehouses located in California, Texas, Florida, and Pennsylvania.
  • Shipping Options
    • We offer a variety of shipping options, including USPS, UPS, and FedEx.
    • We also offer expedited shipping options for an additional fee.
  • Contact Us
    • If you have any questions about shipping, please contact us before you purchase.

Please note that the estimated delivery date is provided by eBay’s automated system and is only an estimate.

PAYMENT POLICY

We accept the following payment methods:

  • PayPal
  • Credit cards
  • Debit cards

Payment Deadline

Payment is required immediately upon purchase. We will not ship your item until payment is received.

Chargebacks

If you file a chargeback against us, we may suspend your account and take other actions to protect our interests.

Contact Us

If you have any questions about our payment policy, please contact us.

Thank you for shopping with us!

Additional Information

  • We do not accept payments in cash or by check.
  • We reserve the right to refuse any payment method.

Payment Handling

eBay handles the sale and the payment for all fixed-rate items. We do not have control over the payment process itself, as this is all handled by eBay. Once you have purchased an item, eBay will send you an invoice and you will be able to pay for the item using your preferred payment method.

No Holds Policy

We have a “no holds” policy, which means that we will not hold an item for you if you have not yet paid for it. If you do not pay for an item within 4 days of purchase, the item will be relisted.

RETURN POLICY

We offer a 30-day return policy for all items. Items must be returned within 30 days of the date of purchase.

Returning Items in Original Point of Sale Packaging

We require that all items be returned in their original packaging. This includes the original box, foam, and any other packaging materials. If the original packaging is damaged or missing, we may charge a fee to replace it.

Do Not Ship Items in Original Packaging (USE A SHIPPING BOX)

Do not ship items back in their original packaging. The original packaging is not designed to withstand the rigours of shipping and may be damaged in transit. Instead, ship the item back in its outer shipping box that came with it or puchase a new box at your local post office. 

This is only void if we ship items to u in their POS packing, for example, Larger items like Magnaflow exhausts.

Restocking Fees

  • Normally stocked items: 20% restocking fee
  • Special order / made-to-order items: 50% restocking fee

Condition of Items

Items must be returned in their original condition, unopened and in the original packaging. Items that have been installed or used will not be accepted for return.  

Reasons for Return

Items may be returned for a refund or exchange for the following reasons:

  • You changed your mind
  • You ordered the wrong item
  • The item is defective

Refunds

Refunds will be issued for the purchase price of the item, minus any restocking fees and shipping charges.

Shipping Charges

Shipping charges are non-refundable. This includes our cost to originally ship an item, even if we did not charge shipping.

Special Instructions

  • Items that are returned must be shipped to the address provided in the return instructions.
  • We recommend that you use a trackable shipping method when returning items.
  • We will not be responsible for lost or damaged items that are returned.

CANCELLATION POLICY

Please note that cancellations must be requested within 1 hour of purchase. If a cancellation is requested after this timeframe, it is possible that the item may have already been shipped. Once an item has been picked, placed on the shipping dock, and a shipping manifest has been generated, it is not possible to halt the shipping process.

  • Cancellation requests must be sent in via eBay’s system in your “My eBay” tab or via messaging with the subject line “Cancellation.”
  • Special order / made to order items cannot be canceled without a 50% restocking fee.
  • Quantity on hand is subject to change at any given time.
  • Items out of stock will be shipped from a distributor or directly from the manufacturer.
  • In the event that an item becomes unavailable due to a listing error, or a discrepancy in the listing description, we reserve the right to cancel the transaction.
  • If a back order occurs, the buyer will be contacted as soon as we are notified by the manufacturer of such delays.
  • In the rare occurrence that an item is discontinued, the buyer will be notified immediately (as soon as such information is confirmed with the manufacturer).

Instructions for Canceling an Order

  • To cancel an order, please send us a message with the subject line “Cancellation.”
  • Please include your order number in the message.
  • We will do our best to cancel your order, but we cannot guarantee that it will be successful if the item has already been shipped.

Item specifics

Condition
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
MPN
CB460R
Brand
BMR Suspension
Manufacturer Part Number
CB460R
UPC
Does not apply

Posted on Leave a comment

Front Upper Ball Joints Mounting Hardware Bolts & Nuts Kit | 1971-1996 GM B-Body

Front Upper Ball Joints Mounting Hardware Bolts & Nuts Kit | 1971-1996 GM B-Body
item image
 Buy Now
Facebook Twitter Pinterest

Price: 6.95 USD

Front Upper Ball Joints Mounting Hardware Bolts & Nuts Kit | 1971-1996 GM B-Body

Front Upper Ball Joints Mounting Hardware Bolts & Nuts Kit | 1971-1996 GM B-Body

Item Description



Application: 1971-1996 GM B-Body – Impala, Caprice, etc.

Part# 986

If you’ll be removing your factory front upper a-arm ball joints to install them on to a set of aftermarket upper a-arms, you’ll need this hardware mounting kit.

This kit is also a great quality mounting hardware kit to be used in place of the cheap 3¢ Chinese nuts and bolts that come with most replacement ball joints. 

Our kit supplies you with all of the hardware you will need to bolt both front upper ball joints on to the front upper a-arms in place of the factory rivets.

Our front upper ball joint mounting hardware kit includes:

  • (8) 1/4″ Grade 8 bolts
  • (8) 1/4″ steel locking nuts

See our eBay Store for more 1971-1996 GM B-Body products!

  • Color Choice
  • Color Choice
  • Payments & Taxes
  • Shipping
  • About Us
  • Returns Policy
  • Color Choice

    Items with a Color Choice: If an item has a color choice shown in the listing description you must tell us your color choice as soon as the order is placed. Please note your color choice in the "Comments" field of the eBay checkout and/or in the "Notes" field when sending your PayPal payment, or simply send us a message through eBay right after placing the order. 

    Orders that are placed without immediately noting your color choice will be shipped the color that is pictured.

  • Payments & Taxes
  • Payments & Taxes

    Payment Types: We only accept payments through PayPal. You can use your Visa, MasterCard, Discover, or American Express credit or debit card through PayPal when checking out, a PayPal account is not required.  Sales Tax: All Pennsylvania sales will be charged 6% sales tax.

  • Shipping
  • Shipping

    Flat Rate Ground Shipping Charges: We offer LOW Flat Rate Ground Shipping that is based on your order total. These charges are clearly listed on all of our listings.  You are only charged the shipping charge of the first item you add to your cart. So if you add additional items to your order there are no additional shipping charges! If your order totals $499.00 or more the shipping is FREE!  Our Flat Rate Ground Shipping Rates:  $00.00 - $25.00 = $6.95 $25.01 - $100.00 = $10.95 $100.01 - $250.00 = $12.95 $250.01 - $498.99 = $14.95 $499.00 or more = FREE GROUND SHIPPING!  Shipping Carrier: Items will ship via USPS, FedEx Ground, and/or UPS Ground at our discretion. The tracking number(s) will be emailed to you upon shipment.  Multiple Items: Be sure to click "Add To Cart" on all of the items you wish to order before going through checkout. eBay's shopping cart checkout system will combine multiple items in to one single order and automatically re-calculate the flat rate shipping charge based on your order total.  HI, AK, APO/FPO & International: Due to the limitations of eBay's shipping system we can only accept orders from the Continental United States (48 States) or locations that are eligible for the eBay Global Shipping program.

  • About Us
  • About Us

    Since 1999 we have committed our efforts to the design and manufacture of suspension, chassis, and drivetrain components that deliver the highest level of quality, performance, and value. Our team of highly skilled craftsmen take pride in their work!  If you have any questions about our products, please feel free to send us a message through eBay.

  • Returns Policy
  • Returns Policy

    We cannot accept returns on parts that have been used or installed. Prior authorization through the eBay return request system must be given before a return can be made. There are no refunds on shipping charges. Buyer pays for return shipping.

    Item specifics

    Condition
    New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
    Manufacturer Part Number
    986
    Surface Finish
    Zinc Plated
    Brand
    Spohn Performance
    Placement
    Front Upper Ball Joints
    Bolt Type
    Grade 8
    Bolt Diameter
    1/4″-28
    Nut Type
    Steel Top Lock
    Fitment Type
    Performance/Custom

    Posted on Leave a comment

    3/8″ Front Rear Air Ride Suspension Bag Bracket Mount Kit For 78-87 Monte G-Body

    3/8″ Front Rear Air Ride Suspension Bag Bracket Mount Kit For 78-87 Monte G-Body
    item image
     Buy Now
    Facebook Twitter Pinterest

    Price: 376.94 USD

    3/8″ Front Rear Air Ride Suspension Bag Bracket Mount Kit For 78-87 Monte G-Body

      Product Questions call 1 800 842 8789

    This kit comes with front and rear bags and brackets for a 1978 – 1987 Monte Carlo

    and

    3/8″ airline and fititngs

    WE ARE A TRUE MANUFACTURER, NOT A RESELLER LIKE WHEELSnPARTS or COMPETITOR KILLER

    29 years at the same location

    This means you are buying from the source.  We have over 3 1/2 acres with $10,000,000 worth of CNC equipment.  If we do not have it, we can build it.  

     

    Returns

    1. Defective products can be exchanged or returned for full price refund within 30 days after you receive the item.

    2. Any returning or exchanging item must be in new condition and cannot be tempered.

    3. Please contact us by eBay email first before you return the item

    Item specifics

    Condition
    New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
    Manufacturer Part Number
    16365
    Part Brand
    Firebird Industrial
    Placement on Vehicle
    Left, Right, Front, Rear
    Brand
    Firebird Industrial
    Warranty
    90 Day
    Performance Part
    Yes
    UPC
    Does not apply

    Posted on Leave a comment

    BMR 78-87 GM G-Body Front Reinforcement Brace

    BMR 78-87 GM G-Body Front Reinforcement Brace
    item image
     Buy Now
    Facebook Twitter Pinterest

    Price: 259.50 USD

    BMR 78-87 GM G-Body Front Reinforcement Brace

    BMR has designed the CB460 for the street performance, drag race, and handling applications. This three-point design solidly links the front frame, adding strength to the chassis. Fits 1978-1987 GM G-Body;Dramatically increases front chassis stiffness;Improves handling and performance;Manufactured from 1 1/4-inch DOM steel tubing;Uses 3/16-inch steel plate;100% bolt-in design;All necessary grade 8 hardware included;Designed for street performance, drag race, and handling applications;Proudly designed and made in the U.S.A.

    Item specifics

    Condition
    New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
    Air Freight Prohibited
    false
    Not Carb Approved
    false
    Carb Acknowledgement Required
    false
    Ltl Freight Required
    false
    Prop 65
    Unknown
    Epa
    N/A
    Clearance Item
    f
    Part Type
    automotive
    Brand
    BMR Suspension
    Manufacturer Part Number
    CB460H

    Posted on Leave a comment

    4″ Tall Front & Rear Bump Stop Extensions Set | Jeep® JK Wrangler

    4″ Tall Front & Rear Bump Stop Extensions Set | Jeep® JK Wrangler
    item image
     Buy Now
    Facebook Twitter Pinterest

    Price: 144.00 USD

    4″ Tall Front & Rear Bump Stop Extensions Set | Jeep® JK Wrangler

    Application: Jeep© JK Wrangler (2 Door) & Wrangler Unlimited (4 Door)

    Part# JK-BSK4

    The Mountain Goat Series™ front and rear bump stop extensions set for the Jeep© JK Wrangler are designed to prevent the over compression of your coil springs and prevent the tires from rubbing the fender flares at full compression, as well as prevent bottoming out the shocks.

    Front and rear bump stop extension lengths should match your tire size: 2″=33″, 3″=35″, 4″=37″. These 4″ bump stop extensions provide 4″ of extra limitation for 37″ tires. We also have them available in 2″ (Part# JK-BSK2) and 3″ (Part# JK-BSK3) lengths for 33″ and 35″ tire applications.

    The Mountain Goat Series™ front bump stop extensions are manufactured from TIG welded 2.75″ x .125″ wall DOM tubing and 3/16″ CNC laser cut steel end plates. The rear bump stop extensions are manufactured from CNC laser cut and formed 3/16″ steel plate and are precision MIG welded for superior durability. They feature an angled design for proper up travel clearance and to provide proper perpendicular engagement when the rear pinion angle is adjusted for proper driveline angles.

    They come powder coated gloss black for optimum corrosion protection and a brilliant and durable finish. All required mounting hardware (Grade 8) is included.

    Priced per Complete Set — Qty. 1 = 1 Front Pair and 1 Rear Pair

    Mountain Goat Series™ 4″ Bump Stop Extensions Specifications & Features:

    • 4″ overall height for use with 37″ tires.
    • Manufactured from 2.75″ x .125″ wall DOM tubing and CNC laser cut and formed 3/16″ steel plate.
    • Grade 8 mounting hardware is included.
    • Powder coated gloss black for optimum corrosion protection and a brilliant and durable finish.
    • Easy 100% bolt on installation with the use of basic hand tools.
    • Proudly hand crafted by skilled craftsman in PA – USA!

      Mountain Goat Series™ Jeep JK SuspensionMade In PA - USA!

      

    See our eBay Store for more Jeep© JK Wrangler products!

    Item specifics

    Condition
    New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
    Manufacturer Part Number
    JK-BSK4
    Placement on Vehicle
    Front, Rear
    Surface Finish
    Powder Coated Gloss Black
    Brand
    Mountain Goat Series™
    Country of Manufacture
    United States
    Universal Fitment
    Performance/Custom

    Posted on Leave a comment

    Adjustable Front Bump Steer Kit | 1993-2002 GM F-Body with Factory Steering Rack

    Adjustable Front Bump Steer Kit | 1993-2002 GM F-Body with Factory Steering Rack
    item image
     Buy Now
    Facebook Twitter Pinterest

    Price: 179.00 USD

    Adjustable Front Bump Steer Kit | 1993-2002 GM F-Body with Factory Steering Rack



    Application: 1993-2002 GM F-Body – Camaro & Firebird

    Part# BS-4

    Altering ride height can result in unwanted toe change during suspension travel. This is known as bump steer. Bump steer kits allow the user to alter the tie rod position on the spindle to correct bump steer.

    Our bump steer kit comes complete with silver zinc plated 4140 chrome moly hex tie rod adjusters, 5/8″ extreme duty Teflon® lined chrome moly spherical rod ends, and 4140 chrome moly tie rod to spindle adapters.

    Our tie rod end to spindle adapters do not require you to drill out your tapered spindle hole. Our tie rod end to spindle adapters are CNC machined from 4140 chrome moly and are machined to be a direct bolt on to the GM spindle taper.

    These are on-the-car bump steer adjustable. The tie rod to spindle adapters are fully threaded with double locking jam nuts for easy up-down adjustment that eliminates the need for different sized spacers.

    Our tie rod end set-up features 5/8” 4130 chrome moly safety washers on the top and bottom of the rod end for adequate articulation spacing and for safe retention of the spherical rod end.

    Priced per Pair —- Qty. 1 = 1 Pair

    See our eBay Store for more 1993-2002 F-Body Camaro & Firebird products!

    Item specifics

    Condition
    New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
    Manufacturer Part Number
    BS-4
    Placement on Vehicle
    Front
    Surface Finish
    Silver Zinc Plated
    Brand
    Spohn Performance
    Steering Rack Fitment
    Factory Steering Rack
    Fitment Type
    Performance/Custom

    Posted on Leave a comment

    78-83 G-body Front to Rear Preformed Brake Line Valve to Hose STAINLESS STEEL

    78-83 G-body Front to Rear Preformed Brake Line Valve to Hose STAINLESS STEEL
    item image
     Buy Now
    Facebook Twitter Pinterest

    Price: 73.00 USD

    78-83 G-body Front to Rear Preformed Brake Line Valve to Hose STAINLESS STEEL

    About Us

    About Us

    Motorcity Muscle Car offers a variety of products for all classic cars and trucks ranging from Brakes, Transmission & Drivetrain, Air Intake & Fuel Delivery, Mouldings & Trim, Decals & Emblems, and Detailing Accessories. Please add us to your list of favorite sellers and come back often as we are constantly bringing new products to market.  Countless hours and immense research has been spent to ensure that our products are 100% authentic in appearance, application and fit. 

    We are located in the heart of "Motor City" Detroit where automobiles are not just transportation, but a way of life! Our staff consists of highly trained sales personal, technical service representatives and mechanical engineers to ensure your receive the best service, the correct information and the highest quality parts on the market. Let us be the source for all of your factory correct muscle car part needs!

    Payment

    Motorcity Muscle Car Payment Terms

    Payment

    Motorcity Muscle Car accepts Paypal and all major credit cards including VISA, MASTER CARD, AMERICAN EXPRESS, and DISCOVER. Payment is required at the time of sale via But It Now or end of auction.

    Sales Tax

    Orders outside the state of Michigan are not required to pay sales tax. All orders placed in the state of Michigan, add 6% sales tax to your total order amount.

    Shipping

    Motorcity Muscle Car Shipping Information

    Shipments within the Continental USA

    Most of our products ship via FedEx Ground or USPS, but we also utilize other convenient and cost effective shipping services.  All  orders are shipped within 24 to 48 hours of receipt. States close to Michigan usually receive shipments within a few days, west coast orders can take up to 5 days.

    Hawaii and Alaska Orders

    All Canada, Hawaii and Alaska orders will be shipped by postal carrier. The cost of shipping to Canada must be determined after the order is initially placed. An invoice will be sent to you with the corresponding shipping rate. In the event that an invoice for shipping charges is not received, please message us via the seller link to get your rate.

    International Shipments

    All international orders are handled via eBay's Global Shipping Program. International shipments can at times take several weeks to get throught customs so please keep this in consideration. 

    Express Shipping

    Motorcity Super Cars does not offer any form of express shipping

    Returns

    Motorcity Muscle Car Return Policy

    Returns & Refunds

    Motorcity Muscle Car stock items may be returned within thirty (30) days from the purchase date. All returns are subject to a 20% restocking charge. Shipped costs must be prepaid and merchandise must be in resalable condition (see below). Returned items must be in new/unused/resalable condition and must be accompanied by a copy of the ebay order or full legal name of seller, eBay user ID and email address for us to process any claim. No returns will be accepted after 30 days from the purchase date. No returns will be accepted for any portion of a complete set.

    We do not provide call tag service for parts pickup. The customer will pay freight on all return orders. Mailbox stores charge service and packing fees that are not refundable by Motorcity Muscle Car.

    Resalable Condition

    All returned goods are to be in resalable condition. This means we will not accept a part used on a car, greasy, damaged, bent or without the original box. Resalable means in the same condition as you received it in.

    Damaged Packages - Shipping

    Report damaged packages immediately by sending a message through the seller link. Please include pictures of the damaged product AND package in your message. Damages MUST be reported WITHIN 48 HOURS of receipt of the order. 

    Shortages or Incorrect Orders

    If there is a mistake on your order, contact us immediately via message though the seller link and we will make arrangements for the exchange of the correct items. Count and confirm all items in sealed bags BEFORE opening that bag. Shortages or other issues must be reported WITHIN 48 HOURS of receipt of the order.

    Terms

    Motorcity Muscle Car Terms & Conditions

    Limited Warranties

    Motorcity Muscle Car warrants that goods sold by it shall be free from defects in material and workmanship, and shall conform to all applicable specifications and drawings. Motorcity Muscle Car liability, whether based on breach of warranty of contract or negligence in manufacturing, shall by limited to replacement or repair (at Motorcity Muscle Car inspection) of the defective or nonconforming goods, or (at Motorcity Muscle Car election) refund of the purchase price. This warranty shall apply, and Motorcity Muscle Car shall be liable for replacement, repair, or refund, only if the buyer has given Motorcity Super Cars written notice of the defect or nonconformity within 30 days after the delivery of goods to buyer. Motorcity Muscle Car assumes no liability over the results of the use of any goods purchased from Motorcity Muscle Car including, without limitation, their use in combination with other components, assemblies or products, or their suitability for a particular environment. The foregoing constitutes the sole and exclusive warranty of Motorcity Muscle Car and the sole and exclusive remedy of the buyer, and is in lieu of all other warranties, expressed or implied, as to merchantability, fitness for the purpose sold, description, quality, or any other matter. Without limiting the foregoing, Motorcity Muscle Car shall in no way be liable for loss of use or profit, or for other collateral, special or consequential damages. Any warranty given by any other manufacturer or supplier of goods sold or of component parts thereof is assigned by Motorcity Muscle Car to the buyer to the extent permissible under law and terms of such warranty.

    Copyright Information

    All content on Motorcity Muscle Car storefront designs and listing pages are copyrighted. No part of this strefront or the listings contained within may be reproduced including text, pictures or layout without written permission from Motorcity Muscle Car. All rights reserved.

    Privacy Policy

    At Motorcity Muscle Car, it is important to us to protect the privacy of your personal information. Whether you are a current customer, a returning customer or just visiting our store for the first time, we are committed to protecting the information you provide to us over the phone, in person, over the internet, or through the mail. Motorcity Muscle Car does not share or profit from any of your personal data.

    Item specifics

    Condition
    New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
    Brand
    Inline Tube
    Type
    Line
    Placement on Vehicle
    Front, Left, Lower, Rear, Right, Upper
    Material
    Stainless Steel
    Features
    Rust-Resistant
    Manufacturer Part Number
    SCMB78M1
    Country/Region of Manufacture
    United States
    Genuine OEM
    OEM Replacement

    Posted on Leave a comment

    Front Engine Mount adapter Kit LS SWAP Monte Carlo Regal For 1978-88 G-body LSx

    Front Engine Mount adapter Kit LS SWAP Monte Carlo Regal For 1978-88 G-body LSx
    item image
     Buy Now
    Facebook Twitter Pinterest

    Price: 47.50 USD

    Front Engine Mount adapter Kit LS SWAP Monte Carlo Regal For 1978-88 G-body LSx

    Condition: 100% Brand New

    Item Model: ET-770

    Material: Raw Steel

    Surface Finish: Anti-Rust Oil

    Installation Instructions: YES

    Number of packages: 1

    Aftermarket Replacement for:#14075A

    ENGINE MOUNTS ARE ADJUSTABLE FROM 1/2″ FORWARD TO 1″ BACKWORD

    Feature

    Upgrade DesignAdjustable conversion mounts are slotted for adjustment with engine placement in the engine compartment, to eliminates clearance and fitment issues when installing your LS engine.

    Feature: 
    These mounts will offer you to move the engine from the initial bell housing position up to 1/2 inches forward, and up to 1 inch rearward.

    Superior Material: 1/4’’ laser precise cutting and CNC formed from high strength steel. Durable, high quality, ready to handle any tough environments. More reliable and safer than other similar products

    Our products can be painted in any color by DIY

    Item specifics

    Condition
    New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
    Other Part Number
    Replace for, 14075A
    Item Model
    ET-770
    Fitment Type
    Direct Replacement
    Manufacturer Part Number
    HL-111766
    Mounting Hardware Included
    Yes
    UPC
    751300221274
    Material
    Raw Steel
    MPN
    HL-111766
    Superseded Part Number
    Replace for 14075A, For 1978 – 1988 G-body LSx Engine adapter Set, LS1 LS2 LS3 LS6 LSX LQ4 LQ9 4.8 5.3 6.0 6.2, FIT A LSx ENGINE IN TO YOUR 1973 – 1988 G-BODY, Monte Carlo, Regal, Cutlass, ENGINE MOUNTS ARE ADJUSTABLE, FROM 1/2″ FORWARD TO 1″ BACKWORD, Aftermarket Replacement for # 14075A
    Placement on Vehicle
    Front
    Package Included
    Mounting Hardware, Installation instruction
    Brand
    Unbranded
    Shipping Notes
    We have multiple warehouses in US, and will choose the nearest one for shipping, according to your address and our inventory
    Type
    Engine Mount Adapter Kit
    Interchange Part Number
    Replace for, 14075A, For 1978 – 1988 G-body LSx Engine adapter Set, LS1 LS2 LS3 LS6 LSX LQ4 LQ9 4.8 5.3 6.0 6.2
    Item Condition
    New
    Notice
    This is aftermarket replcement part
    Manufacturer Warranty
    Lifetime
    Installation Instruction Included
    Yes
    Finish
    Anti-Rust Oil