Posted on Leave a comment

TFSC 01 Fork Spring Compressor Tool For Most Current Sport Bikes & Road Racers

TFSC 01 Fork Spring Compressor Tool For Most Current Sport Bikes & Road Racers
item image
 Buy Now
Facebook Twitter Pinterest

Price: 138.88 USD

TFSC 01 Fork Spring Compressor Tool For Most Current Sport Bikes & Road Racers

TFSC 01 Fork Spring Compressor Tool Fits For Most Current Sport Bikes and Road Racers

Features:

1.【Great Compatibility】Specifically designed for Victory Off-Road, Victory CCT, Kawasaki and other sport bikes, road racing bikes and motorcycles with barrel forks.

2.【Product Function】This tool can compress the spring when the fork cover is removed from the bar, making it safer to replace the fork seal and oil. Simply screw the top nut onto and bolt near the top to adjust the length and width to fit your fork.

3.【Superior Material】Made of high quality stainless steel, high strength, anti-corrosion and anti-rust, impact resistant, strong and durable. High precision and rigidity ensure reliable long-term service.

4.【Must Have Tool】The innovative design allows the tool to be used with either the top fork or bottom fork of your bike, easy and fast, saving money and time.

5.【Satisfaction Guarantee】We committed to providing customers with a good product experience, if you are not satisfied with our products, simply return it for a full refund in 30 days. We support 12 months’ Warranty.

tdfchg

SHOW DETAIL!

Made of highest quality Stainless Steel for great strength, prevent corrosion and rust, impact resistance, sturdy and durable. High precision and hardness ensure reliable long-term service.

5246515843218643652687465

687465

How To Use The Fork Spring Compressor Tool

1. Mount the fork leg in the Spring Compressor.

2. The Pin on the Foot goes into the hole in the bottom of the fork.

3. Put the pins of the Spring Compressor into the holes and tighten the adjuster screw until both pins are fullycaptured by the hole.

4. Tighten the Spring Compressor with an electric drill with a socket or a speed handle but make sure you stop before the tool hits the top of the fork tube.

5. Once the fork is compressed enough, extend the damping rod and remove the Bleeding Tool.

6. Install the Fork Cap. Make sure the Fork Spring Preload Adjuster is backed out all the way.

7. Bring the jam nut up against the fork cap.

8. Back out the adjuster a few clicks to give the Needle clearance from the Seat while you.

9. Tighten the Jam Nut.

10. Unscrew the Fork Spring Compressor Tool, remove the fork leg from the tool, and tighten the Cap.

11. Set all your adjusters, mount the forks on the bike, and enjoy.

Package Contents:

1* TFSC 01 Fork Spring Compressor Tool

Item specifics

Condition
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
UPC
Does not apply
Brand
ANVALEE
Manufacturer Part Number
VA1069001
Type
Fork Spring Compressor Tool
OE/OEM Part Number
TFSC 01
Fitment
For Most Current Sport Bikes and Road Racers
Material
Stainless Steel
Color
Black
Manufacturer Warranty
1 Year

Posted on Leave a comment

BMR Lowering Spring Kit (Set Of 4) – Red for 78-87 G-Body

BMR Lowering Spring Kit (Set Of 4) – Red for 78-87 G-Body
item image
 Buy Now
Facebook Twitter Pinterest

Price: 289.95 USD

BMR Lowering Spring Kit (Set Of 4) – Red for 78-87 G-Body

BMR Lowering Spring Kit (Set Of 4) – Red for 78-87 G-Body

BMR Lowering Spring Kit (Set Of 4) – Red for 78-87 G-Body

Item Description

There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks your GM G-body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. The SP035 offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. Lowers your 1978-1987 GM G-body 1.5-inch;Improves handling and ride quality Manufactured from chrome silicon high-tensile spring wire Cold wound on a CNC Coiling Machine to exact specifications Lifetime warranty against spring sag Stress-relieved at 750 degrees F Shot-peened Computer tested for accurate height and spring rate Made in the U.S.A.

From our wide selection

  • Product Information
  • Product Information
  • Communication
  • Shipping Terms
  • Return Policy
  • About Us
  • Product Information

    Some photos are stock photos and may vary from actual part. Please see complete description of this part to make sure it is the correct part you need. Please carefully check to make sure this will fit your application.

    • Professional installation is strongly recommended.

  • Communication
  • Communication

    Excellent communication and customer service is our goal! We are usually available to answer any questions during East Coast business hours Monday thru Friday. If we see your question outside of this timeframe, we will attempt to respond if possible.

    • If you are unable to locate exactly what you are looking for in our store, please feel free to reach out to us!
    • We have many products available that are not currently listed on this site. If you are looking for something in particular, please contact us, and we will do our best to find it for you. 
    • If you have an issue with a product or our service, please contact us directly to allow us to work with you to resolve any concern. 

  • Shipping Terms
  • Shipping Terms

    We ship daily Monday-Friday, except holidays. Orders generally ship out same or next business day. We ship from various warehouses located around the US. We attempt to ship from the warehouse closest to you to assist in prompt delivery. We offer combined shipping upon request, if the products can be safely packaged together.

    • For international orders, we utilize eBay Global Shipping. Please note that the import fees, duties, or taxes are not included in the item price or shipping charge. These charges are the buyer’s responsibility.
    • Most items cannot be shipped to P.O. Boxes. If you would like to ship to a P.O. box, please contact us before purchase.
    • If expedited shipping is desired, please contact us for a shipping quote. 
    • Items that exceed $500 may ship with a signature required. 

  • Return Policy
  • Return Policy

    All return requests must be made within 30 days of the delivery date of the item(s) ordered. All returned merchandise must be in original packaging, and in new, uninstalled condition. All returns require an RMA (Return Merchandise Authorization).

    • We do not accept returns on parts that have been installed.
    • Any items that have a warranty issue will be handled by the manufacturer. Please contact us for assistance with warranty issues or manufacturer defects. 



  • About Us
  • About Us

    Show N Go Performance is a family owned and operated business located in Florida. We offer a large selection of aftermarket parts from the most trusted manufacturers in the market. Whether it be for street, track, off-road, or a custom build, we offer a wide variety of options. With access to millions of products, we have an ever-expanding parts inventory system, and are constantly doing our best to stay up to date with the latest car culture trends. Our goal is to offer you the right parts at the right prices!

    Item specifics

    Condition
    New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
    Brand
    BMR Suspension
    Manufacturer Part Number
    SP035R
    Interchange Part Number
    bmrSP035R
    MPN
    SP035R

    Posted on Leave a comment

    UMI 90064 1967-72 A-Body 1978-88 G-Body 1982-2002 F-Body Rear Spring Spacers Kit

    UMI 90064 1967-72 A-Body 1978-88 G-Body 1982-2002 F-Body Rear Spring Spacers Kit
    item image
     Buy Now
    Facebook Twitter Pinterest

    Price: 39.99 USD

    UMI 90064 1967-72 A-Body 1978-88 G-Body 1982-2002 F-Body Rear Spring Spacers Kit

    UMI Performance 67-72 A-Body 78-88 G-Body 82-02 F-Body Rear Spring Spacers Kit *90064

    UMI’s rear spring spacers may be just the ticket to achieve that perfect stance or prevent tire rub. UMI’s zinc coated, laser cut mild steel spacers are available in 1/8” and 3/16” thickness and can be safely stacked. They provide an easy way to fine tune the rear ride height of your GM A, G and F-body. No cutting, welding or drilling required. We recommend these for fine-tuning only, and maximum adjustment amount is the responsibility of the installer. Normal installation position is on the upper perch although lower perches may have adequate height (F-Body lower perch only). Kit includes four 1/8” and two 3/16” spacers. 100% manufactured, tested and raced out of Philipsburg, PA – USA.

    Note: Spacers may work on other vehicle models. Please use the measurements to verify fitment. OD= 3-3/4” ID= 2-7/8”

    SHIPPING IS FLAT RATE 9.95 in the continental US. AK, HI, PR, and all others must email for actual shipping cost.

    Payment must be received within 5 days of auction’s end.

    BE SURE TO CHECK OUT MY OTHER AUCTIONS FOR 82-2002 CAMAROS and FIREBIRDS CLICK HERE!

    Item specifics

    Condition
    New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
    Brand
    UMI
    Manufacturer Part Number
    90064

    Posted on Leave a comment

    New Hood Spring 78-88 G-Body Monte Carlo SS Grand National El Camino Regal

    New Hood Spring 78-88 G-Body Monte Carlo SS Grand National El Camino Regal
    item image
     Buy Now
    Facebook Twitter Pinterest

    Price: 27.99 USD

    New Hood Spring 78-88 G-Body Monte Carlo SS Grand National El Camino Regal

    New Hood Spring 78-88 G-Body Monte Carlo SS Grand National El Camino Regal

    This is a new hood spring. This product will fit any 1978-1988 G-Body such as the Monte Carlo SS, El Camino, Grand National, Malibu, etc. Check the part compatibility to see if this spring will fit your classic car.

    Perfect for any restoration project!

    Item specifics

    Condition
    New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
    Manufacturer Part Number
    525
    Brand
    Mike’s Montes
    UPC
    Does not apply

    Posted on Leave a comment

    UMI 3051 78-88 G-Body Lowering Spring Kit, 2 Inch Lowering

    UMI 3051 78-88 G-Body Lowering Spring Kit, 2 Inch Lowering
    item image
     Buy Now
    Facebook Twitter Pinterest

    Price: 319.99 USD

    UMI 3051 78-88 G-Body Lowering Spring Kit, 2 Inch Lowering

    UMI 3051 78-88 G-Body Lowering Spring Kit, 2 Inch Lowering UMI Performance

    UMI 3051 78-88 G-Body Lowering Spring Kit, 2 Inch Lowering

    Sku # 1853051

    Mfr. Part # 3051

    Details

    Info

    A spring is a spring right? Wrong! When UMI chose to manufacture our own line of springs we went all out. Designed in conjunction with a leading Sprint Cup chassis engineer, these springs are the best in the business. Our front springs are wound from 5160 CrSi premium wire and feature a linear 600 lb/in rate. The rear springs are wound from 9254 CrSi premium wire and feature a linear 130 lb/in rate. The linear rate provides consistent handling characteristics which are important for Auto-x and Pro-Tour applications while the increase in stiffness reduces body roll and prevents the “floating” feeling so common with the G-Body. These springs are suitable for Auto-x and Pro-Tour applications as well as corner carving/cruising. The ride height is engineered for a 2” lowering with standard SBC as well as LS power (lightened cars may require spring trimming). The front springs are also suitable for full weight Big Block applications when ¼” nose down rake is desired. They have a tough, black powder coat finish and UMI proudly manufactures these premium quality springs in the USA.

    Consistent rates and only the best materials (premium Chrome Silicon wire) ensure your cars sits properly for years to come.

    Linear spring rates (600 lb/in front, 130 lb/in rear) provides a firm yet comfortable ride and incredible handling.

    No more floating feeling.

    Suitable for Pro-Tour, Auto-x and general cruising.

    Manufactured in the USA

    Charts

    (PDF)

    Specs

    Progressive Rate Spring

    No

    Front Suspension Height

    2.0 Inch Lowered

    Rear Suspension Height

    2.0 Inch Lowered

    Material Type

    Chrome Silicon

    Tech Support

    We’re here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.

    About

    Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

    Item specifics

    Condition
    New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
    Brand
    UMI Performance
    Type
    Coil Springs
    Item Width
    15.000
    Manufacturer Part Number
    3051
    Color
    Black
    Item Length
    16.70
    Material
    Chrome Silicon

    Posted on Leave a comment

    HEADLIGHT ADJUSTER SPRING USED 78-87 El CAMINO A/G BODY UB3589

    HEADLIGHT ADJUSTER SPRING USED 78-87 El CAMINO A/G BODY UB3589
    item image
     Buy Now
    Facebook Twitter Pinterest

    Price: 10.14 USD

    HEADLIGHT ADJUSTER SPRING USED 78-87 El CAMINO A/G BODY UB3589

    BOLT NUT SCREW AND CLIP LISTINGS MOVED FROM GMCLASSICPARTS TO GMCP-BNSC TO OFFER SHIPPING DISCOUNTS.

    PAY FOR MULTIPLE ITEMS AT ONE TIME ON GMCP-BNSC TO RECEIVE $4.00 OFF ITEMS 2-99 ATCHECKOUT.

    https://www.ebay.com/str/gmclassicparts

    https://www.ebay.com/str/gmclassicboltsnutsscrewsclips

    TERMS AND CONDITIONS

    ***************************************************************************************************************************************

    WE ACCEPT VISA, MASTERCARD, AMEX &PAYPAL.



    ITEM CONDITION DEFINITIONS

    NOS GM, GM, GM RESTORATION,GMR = UNUSED GM, GM RESTORATION, OR DISCONTINUED GM (NOS GM) WHICH MAY OR MAY NOT BE MADE IN THE U.S. AND MAY OR MAY NOT BE IN GM PACKAGING.

    NEW= UNUSED REPRODUCTION

    USED = ACCEPTABLE OR DRIVER QUALITY (POOR), GOOD, VERY GOOD, OREXCELLENT.

    USED PARTS ARE AS PULLED. WE DO NOT CLEAN THEM UNLESS NOTED.

    LH= DRIVER SIDE RH= PASSENGERSIDE

    SHIPPING & PAYMENT POLICIES

    1. SHIP TO ADDRESS. WE SHIP TO THE ADDRESS PROVIDED WITHYOUR PAYMENT NOTICE. WE DO NOT SHIP TO THIRD PARTIES AND CANNOT HONOR EMAILED REQUESTS FOR CHANGES TO SHIP TO ADDRESS. IF YOU HAVE ANY QUESTIONS ABOUT THIS POLICY PLEASE READ EBAY POLICIES RE SELLER PROTECTION. YOU WILL BE INVOICED VIA PAYPAL FOR RESHIPPING IF YOUR ITEM IS RETURNED BECAUSE YOUR PAYMENT NOTICE CONTAINED AN INCORRECT ADDRESS. BE SURE YOUR ADDRESS IS CORRECT.2. HANDLING TIME. ORDERS ARE SHIPPED WITHIN 3 BUSINESS DAYS FROM RECEIPT OF PAYMENT.



    3.SHIPPING NOTICE.
    A SHIPPING NOTICE WITH TRACKING INFORMATION WILL BE EMAILED DIRECTLY FROM GMCP UPON SHIPMENT TO THE EMAIL ADDRESS FROM WHICH NOTICE OF PAYMENT IS RECEIVED. WE WILL NOT APPLY TO BE ADDED TO YOUR EMAIL LIST. IF YOU HAVE A SPAM BLOCKER ON YOU MAY NOT RECEIVE THE SHIPPING NOTICE OR ANY EMAILED RESPONSES.

    4. LOCAL PICKUP. AVAILABLE BY APPOINTMENT MON-THUR 1PM – 1AM. INBOWDON, GA. 10 MILES OFF I 20 WEST LAST EXIT IN GA.

    RETURN POLICIES

    RETURNS WILL BE SUBJECT TO A 25% RESTOCKING FEE & BUYER PAYS RETURN SHIPPING.

    Item specifics

    Condition
    Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is …
    OE/OEM Part Number
    549398
    Brand
    General Motors
    UPC
    Does not apply

    Posted on Leave a comment

    QA1 # 7720-203 Coil Spring Adapter Plates for Lower Control A-Arms 70-81 Camaro

    QA1 # 7720-203 Coil Spring Adapter Plates for Lower Control A-Arms 70-81 Camaro
    item image
     Buy Now
    Facebook Twitter Pinterest

    Price: 70.00 USD

    QA1 # 7720-203 Coil Spring Adapter Plates for Lower Control A-Arms 70-81 Camaro



    New Set of QA1 7720-203 Coil Spring Adapter Plates for 70-81 Camaro/Firebird, 78-88 G-Body, & 1982-2004 S-10 Pick-Up Truck models with QA1 Lower Control Arms.

    If you want to run stock style coil springs with QA1 lower tubular control arms, you’re going to needs these. Double check the QA1 P/N’s and make sure these are for you!

    These are in-stock and ready to ship today!

    These QA1 coil spring bolt-in adapters are designed to allow the QA1 control arms to be used with stock springs. They are made from quality materials and install easily with no modifications.

    These are made to work with QA1 P/N’s:

    122-52365

    122-52465

    122-52364

    122-52464

    NOTE:

    • These will Fit the Following QA1 Control Arm P/N’s:
    • P/N 52364, 52464 for 1978-1988 GM G-Body
    • P/N 52320, 52420 for 1970-1981 GM F-Body & 1973-1977 GM A-Body
    • P/N 52366, 52466 for 1982-2004 GM S Series
    • NOTE:  The shock mounting bolt holes on QA1 control arms are threaded 3/8”-24. Factory shock mounting bolts will not work.  

    APPLICATIONS:

    1978-1988 GM G-Body, 1970-1981 GM F-Body, 1973-1977 GM A-Body, and 1982-2004 GM S Series.

    ADDITIONAL INFO:

    For additional information or questions concerning this part please send a message through the eBay message system. All parts listed for sale by Camaro Central here on eBay are stocked in our huge warehouse. We do not do pre-sales or drop shipments unless noted otherwise in the item’s description.

    PAYMENT METHODS:

    We accept PayPal, all major credit cards, and debit cards. Please email if you have any questions about other possible forms of payment methods through eBay.

    SHIPPING INFORMATION:

    All items are shipped professionally packaged with UPS or USPS. Insurance is included in all shipping charges. Items too big for UPS can be shipped truck freight, delivered to any car show we attend, or picked up locally at our warehouse. Once your payment has been processed and received to us, your part will then usually ship out the same business day if the payment was made before 1 pm EST or the next business day if the payment was made after 1 pm EST. A tracking number will be added to your eBay invoice and sent via email to the email address you have on record with eBay.

    RETURN POLICY:

    Returns will only be accepted up to 30 days from the day the item is received by the buyer. Once your item is received please open and inspect your package upon delivery. Please report to us any problems that you may have with your item via email or phone at 1-859-408-200. EBay encourages buyers to communicate with us on any problems that they may have with an item in a timely manner so we can provide additional customer support when needed after the sale. A damaged item, typographical errors in the item description, or an accidental wrong shipped item will be promptly fixed by Camaro Central as soon as we know about it from you the buyer. All other returns will be subject to a re-stock fee and shipping the item back will be the responsibility of the buyer. No returns will be accepted after 30 days. You may also use eBay’s return system as well.

    Item specifics

    Condition
    New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
    Brand
    QA1
    Type
    Control Arm Repair Kit
    Items Included
    Nut, Plate, Rubber Seal
    Manufacturer Part Number
    7720-203
    Material
    Alloy Steel
    Vintage Part
    Yes
    Universal Fitment
    Yes
    Placement on Vehicle
    Front, Lower
    Performance Part
    Yes