TFSC 01 Fork Spring Compressor Tool For Most Current Sport Bikes & Road Racers

Price: 138.88 USD

Features:

1.【Great Compatibility】Specifically designed for Victory Off-Road, Victory CCT, Kawasaki and other sport bikes, road racing bikes and motorcycles with barrel forks.

2.【Product Function】This tool can compress the spring when the fork cover is removed from the bar, making it safer to replace the fork seal and oil. Simply screw the top nut onto and bolt near the top to adjust the length and width to fit your fork.

3.【Superior Material】Made of high quality stainless steel, high strength, anti-corrosion and anti-rust, impact resistant, strong and durable. High precision and rigidity ensure reliable long-term service.

4.【Must Have Tool】The innovative design allows the tool to be used with either the top fork or bottom fork of your bike, easy and fast, saving money and time.

5.【Satisfaction Guarantee】We committed to providing customers with a good product experience, if you are not satisfied with our products, simply return it for a full refund in 30 days. We support 12 months’ Warranty.

SHOW DETAIL!

Made of highest quality Stainless Steel for great strength, prevent corrosion and rust, impact resistance, sturdy and durable. High precision and hardness ensure reliable long-term service.

How To Use The Fork Spring Compressor Tool

1. Mount the fork leg in the Spring Compressor.

2. The Pin on the Foot goes into the hole in the bottom of the fork.

3. Put the pins of the Spring Compressor into the holes and tighten the adjuster screw until both pins are fullycaptured by the hole.

4. Tighten the Spring Compressor with an electric drill with a socket or a speed handle but make sure you stop before the tool hits the top of the fork tube.

5. Once the fork is compressed enough, extend the damping rod and remove the Bleeding Tool.

6. Install the Fork Cap. Make sure the Fork Spring Preload Adjuster is backed out all the way.

7. Bring the jam nut up against the fork cap.

8. Back out the adjuster a few clicks to give the Needle clearance from the Seat while you.

9. Tighten the Jam Nut.

10. Unscrew the Fork Spring Compressor Tool, remove the fork leg from the tool, and tighten the Cap.

11. Set all your adjusters, mount the forks on the bike, and enjoy.

Package Contents:

1* TFSC 01 Fork Spring Compressor Tool