1978-1987 G Body 9 INCH REAR END KIT TRUE TRAC COMPLETE WITH DRUM BRAKES

Price: 2,891.00 USD

1978-1987 G Body 9 INCH REAR END KIT TRUE TRAC COMPLETE WITH DRUM BRAKES

?The Detroit Truetrac is a helical-gear style performance differential that maximizes wheel traction and enhances driving and handling characteristics.

Operation

The Truetrac operates as a standard or open differential under normal driving conditions, allowing one wheel to spin faster or slower as necessary. When a wheel encounters a loss of traction or the terrain changes, the gear separation forces take effect and transfer torque to the high-traction wheel. The helical-shaped gears mesh with increasing force until wheel spin is slowed or completely stopped. When the vehicle exits the low traction situation, the differential resumes normal operation.

Performance

Operation of the Truetrac is smooth, quiet and automatic. The unit will engage without any driver knowledge or action required. It also has no wearable parts and requires no maintenance, meaning less time in the garage and more on the road.

The Eaton Detroit Truetrac is a very versatile differential that can enhance traction in a variety of vehicles. Units are currently available for front- and rear-axle applications. Below is a list of common uses:

Daily street-driving cars, trucks and SUVs
Tow vehicles
Off-road or trail rigs
High-horsepower racing vehicles
RVs/Motor Homes
Utility Vehicles
Landscape Trucks
Walk-in Vans

Package includes: PEM nodular iron case, iron Daytona pinion support, pinion bearings & races, pinion bolts, pinion depth shims, pinion seal, pinion nut, side bearings & races, premium ring gear bolts, tail bearing and tail bearing retainer plate.
All bearings and seals are Premium Brands ( either Timken or Koyo).
Also comes with big housing gasket and u-bolts for yoke.

PEM 9″ Ford 11″ Drum Brake Kit

ALL NEW KIT

11″ drum Brake Kit for 9″ Ford Rear End.
Choose bolt pattern you want, the drums come with 5 x 5.5″ bolt pattern
NOTE: If you are wanting a 5×4.5 , 5×4.75 or 5×5 bolt pattern added you must tell us upon checkout in the “Note to Seller” or you will just receive the standard 5×5.5 pattern all with 1/2″ holes
I.D. Brake Drum x 2.75″ machined surface inside.
Drum O.D. is 12.625″ at the biggest part.
Drum has 2.78″ Hub Register.
Brake shoes are 2.25″ wide.
The backing plates fit Big Bearing 3.15″ OD Bearing for the New Style Big Ford with 3/8″ bolts (as shown in pictures)
For 2.5″ axle offset.