Adjustable Torque Arm | 1982-1992 F-Body Camaro & Firebird with Turbo 400 Trans.

Price: 561.50 USD

Application: 1982-1992 GM F-Body – Camaro & Firebird (with Turbo 400 Transmission)

Part# 304-FL-DS

This Standard Duty crossmember mounted adjustable torque arm kit is for installing a short tail Turbo 400 transmission into a Third Generation F-Body Camaro or Firebird. This kit includes the transmission crossmember required to install the short tail TH400 transmission, along with our transmission crossmember mounted Standard Duty adjustable torque arm.

The short tail Turbo 400 transmission has no provisions to mount the factory torque arm on to the transmission tailshaft. Our torque arm package makes the short tail Turbo 400 swap an easy 100% bolt right in installation with the use of basic hand tools!

If you want serious performance, handling, and traction when you’re at the dragstrip, AutoX, or road racing; then you need a Spohn Performance fully adjustable torque arm, here’s what it’ll do:

• Attaches to the rear axle and controls rear end torque during acceleration, transferring this energy into the tires, increasing straight line traction.
• Reduces nose-dive during braking.
• Eliminates wheel hop.
• Increases side bite during corner exit acceleration.
• No fabrication, welding or drilling required – 100% bolt-in installation with the use of basic hand tools!
• Removes the torque arm pivot point from the rear of the transmission to the supplied crossmember.
• Changes the instantaneous center and leverage point from stock.
• Provides adjustable pinion angle.

Build Specifications & Features:

• Constructed of 1.25″ o.d. x .120″ wall DOM tubing.
• TIG welded 4130N chrome moly threaded tube adapters for maximum thread strength.
• Heavy-duty CNC laser cut 3/8″ steel rear axle housing mounting bracket.
• Heavy-duty transmission crossmember fabricated from CNC laser cut and formed 3/16″ steel with integral torque arm rotator mounting system. Our rotating front torque arm mount (thrustator) allows the torque arm to travel fore/aft which is VERY necessary with a torque arm suspension system. Solidly mounting the front of the torque arm causes the suspension to bind and hurts your car’s handling drastically. The front rotator tube has an integral grease fitting to allow for proper lubrication.
• Del-Sphere™ pivot jointed front mount provides for bind-free articulation and the best in street-friendly performance and strength.
• Rear of torque arm mounts to the 3/8″ steel rear axle housing mounting bracket via two 3/4″-16 NFT x 5/8″ bore x 7/8″ thick solid steel rod ends. These are solid rod ends, not spherical bearing rod ends, so noise is of no concern. Grade 8 – 5/8″ bolts and 5/8″ nylock nuts are supplied.
• Integral 4140 chrome moly pinion angle double adjuster between the bottom rear solid rod end and the bottom rear torque arm tube allows for easy pinion angle adjustment. A simple turn of the wrench will give you over 6 degrees of pinion angle adjustment, it’s that simple.
• This is a proven product being run on some of the fastest thirdgen F-Bodies in the country!
• The rear axle housing mounting bracket is designed to fit on stock and/or aftermarket rear ends.
• Available powder coated in your choice of bright red or gloss black for a brilliant and durable finish.
• Includes a front driveshaft safety loop. NHRA rules call for a front driveshaft safety loop to prevent catapulting of the vehicle in the event of a front u-joint or driveshaft failure.

Specify Color Choice When Ordering:

Color: You must specify red or black when ordering.

Related Products:

Adjustment Tool: Del-Sphere™ pivot joint adjustment tool. You can purchase this by searching for Part# DS34-W in our eBay Store.

Angle Finder: Magnetic angle finder used for setting pinion angle. You can purchase this by searching for Part# HF-34214 in our eBay Store.

Transmission Crossmember Mounting Hardware Kit: New mounting hardware for the transmission crossmember. You can purchase this by searching for Part# 974 in our eBay Store.

Torque Arm to Rear Axle Housing Mounting Hardware Kit: New mounting hardware for the torque arm to rear axle housing mount. You can purchase this by searching for Part# 982 in our eBay Store.