Price: 85.00 USD
1978-88 G Body Monte Carlo Cutlass Regal Front Windshield Trim Pieces
These are the two side pieces that go along the windshield on 2 door models. They are not perfect but will clean up nice. Check out my other parts. Thanks
Price: 120.62 USD
BMR Suspension RB003R Control Arm Reinforcement Braces for 1978-1987 G-Body
FAST & FREE
SHIPPING
30-DAY
RETURNS
SECURE
PAYMENT
EXCELLENT
SERVICE
Specifications:
Launching harder, reducing wheel hop, and adding cornering consistency to your 1978-1987 GM G-body is easy with Control Arm Reinforcement Braces from BMR Suspension. Stamped steel sections of the factory frame can deflect under load and change the rearend geometry. BMR’s Control Arm Reinforcement Braces (RB003) attach to the inner upper control arm mounts and lower control arm mounts, adding strength to the areas that are prone to deflection. Manufactured from heavy-duty 1.00-inch diameter, 0.120-inch wall DOM steel tubing, the reinforcement braces are a great way to reduce frame deflection. In addition, the reinforcement braces strengthen the upper control arm frame mounts by tying the upper mounts and lower mounts together.
BMR Suspension designed its Control Arm Reinforcement Braces to work well in street performance, drag race, and road race applications. The heavy-duty construction eliminates flex, giving you much improved repeatability on the street, starting line, or in the corners. The reinforcement braces provide additional strength to the rear suspension for a more responsive driving experience. BMR’s RB003 are designed to strengthen the chassis, while keeping plenty of room mufflers and exhaust systems. This product is the perfect upgrade for the enthusiast looking to improve performance, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!
BMR Suspension’s Rear Suspension Kits are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.!
1978 – 1987 Buick Grand National
1978 – 1987 Buick Regal
1978 – 1987 Chevrolet Monte Carlo
1978 – 1987 Chevrolet El Camino
1978 – 1987 Chevrolet Malibu
1978 – 1987 Oldsmobile Cutlass
1978 – 1987 Pontiac Grand Prix
If you have fitment questions or concerns, please contact us prior to ordering.
*Please see the “Compatibility” link at the top of the listing.
Price: 299.99 USD
NEW CURRIE REAR SUSPENSION BRACKET KIT,78-87 G BODY WITH 9″ FORD REAR END
|
Price: 649.99 USD
G Body Custom Center Console Cutlass Regal Monte Carlo Grand Prix El Camino
G Body Custom Center Console
Will fit any 1978-88 G body Cutlass, Regal, Monte Carlo, Grand Prix, El Camino, Malibu, or Grand National.
***This listing is for the pictured console, fully upholstered using your own material.
Features:
-Your choice of black, stainless steel, or stainless steel cupholders with LEDs (Red, Blue, or Green)
*Custom LED colors available upon request for an additional charge
-Your choice of 2: USB charging ports, voltmeter, on/off switch for LED cups, or 12 V socket
-Storage in the center with lid and stainless piano hinge
-A cut out with a blank plate or tray in that plate (for shifter)
*If you do have a shifter, you will need to cut the opening in the plate before doing the upholstery
Build Specifications:
-46″ (front to rear) x 12″ tall x 7.5″ wide
This is a made to order. Once your purchase comes through, we will contact you to go over all of the details to ensure you get the exact console and add-ons.
Price: 125.99 USD
Powder Coated Transmission Crossmember Fit for 1978-1988 Chevrolet Monte Carlo
|
Fit For For 1978-1988 Chevrolet Monte Carlo G-Body Note：Please Match actual photos of the item with yours before the purcahse. |
 |
|
Features
|
 |
|
 |
INSTALLATION
After service Notification
If you are satisfaied with our product and service please leave us a positive feedback,if there is any problem when you received the package,please feel free to contact us,we will be definitely give you a satisfying solution,please don’t open a return request or leave negative feedback without any communication,cause it will make things complicated. it will take both of us much time to handle this issues.
Warranty
The product has 6 months warranty .
If the product has serious rust and deformation problems, we will endeavour to dispatch the replacement product to you at the earliest and free of charge (delays possible due to stock availability).
Shipping
We have multiple warehouses in US, and will choose the nearest one for shipping, according to your address and our inventory.
Contact us
If you have any questions, pls feel free to contact us. We will reply you ASAP!
Price: 159.00 USD
3-ROWS ALUMINUM RADIATOR Fits CHEVROLET CAMARO 70-81 MONTE CARLO 78-87 G-BODY
3-ROWS ALUMINUM RADIATOR Fits CHEVROLET CAMARO 70-81 MONTE CARLO 78-87 G-BODY
Package Include:
1 X 3-Row AA5052 Aluminum Radiator
1 X CNC Machined Radiator Cap
Radiator Size:
Brand:ASI Performance
Condition:New
High Performance Racing Spec.
3-Row of tubes Core Racing Design
Petcock Drain:OEM style brass petcock drain
Core Dimensions: 16 6/7″ H x 26 2/9″ W
Overall Dimensions: 18 1/2″ H x 31 5/7″ W
Inlet Diameter: 1-1/2″
Outlet Diameter: 1-4/7″
Trans Cooler Included -1/2″ 20 STRAIGHT THREAD G1/4-
Mount Type: Saddle
Vehicle Fitment:
1977-1980 Chevy C/K Series 10 20 30 Suburban Pickup 26 1/4″ core
1977-1981 Chevrolet Camaro / Caprice 80-86 5.0L 5.7L V8
1978-1987 Chevrolet Camino/ Monte Carlo
1980-1985 Chevy Impala/Nova 1977-1979
1978-1980 Chevrolet K5 Blazer
1977-1980 Chevy G/P Series 10 20 30 Pickup 26 1/4″ core
1978-1983 Chevy Malibu/Oldsmobile Omega 1978 1979
1980-1986 Pontiac Bonneville/Grand LeMans 1978-1980
1978-1981 Pontiac LeMans/Grand Prix 1978-1987
1978-1987 Oldsmobile Cutlass/Cutlass Supreme
1977-1980 GMC C/K C1500 C2500 C3500 Suburban C15 C25 C35
1977-1981 Buick Skylark Regal Century 1978 1987 1979
Please check compatibility (FIT 26 1/4″ WIDE CORE ONLY)
Manufacturer Part Number：162,SBR162,DPI162,CC162,CU162,KKS162
The advantages of our radiator：
Our Radiator is made of AA5052 aircraft aluminum. Its different from other sellers T-3303 Series. In fact, AA5052 series Aluminum is much better than T-3303 series.
More than 90% of aftermarket manufacturers use the T-3303 series Aluminum, because it is cheaper and easier to get the material. However, T-3303 aluminum has many disadvantages, such as poor polishing effect, softness, easiness to scratch and corrode, poor heat dissipation effect. If the T-3303 aluminum radiator is operated in high pressure and high temperature for a long time, the leaking problem would occur very soon.
AA5052 Aluminum is an Al-Mg alloy with good corrosion resistance, excellent reliability and cold workability and strength. The main alloying element of T-5052 is magnesium, which has good forming and processing properties. It is widely used in the manufacture of aircraft fuel tanks, oil pipes, and sheet metal parts of transportation vehicles and ships, hardware products, and electrical-appliance casings.
This AA5052 Aluminum Radiator is designed to provide maximum cooling efficiency to prevent premature engine failure. Its light-weight, and high-heat transferring aluminum features a tube and fin design that, dramatically increases surface area that enables the heat to dissipate more efficiently. This AA5052 Aluminum Radiator is at least 30%-45% more efficient than stock ones. Most importantly, it has a much higher capacity for coolant than stock ones, which means that your cooling system will be more efficient and will be more resistant to temperature surges in racing applications.
1. Made from Aircraft AA5052 grade aluminum for prolonged lifespanand with raw aluminum finish
2. Brazed core technology to guarantee optimum performance and dependability
3. All AA5052 Aluminum 2mm thick tanks and fittings,Ensure it’s hard and durable
4. Billet Aluminum CNC machined fill neck rugged and durable
5. CNC machined cap with Engraved craftsmanship, anodized treatment.
6. OEM style brass petcock drain much better than other plastic one on eBay
7. Carefully crafted to exceptional OE standards for precise fit.
PAYMENT
SHIPPING
RETURNS
FEEDBACK
ABOUT US
Copyright ? racing_autopart. All Rights Reserved.
Package Include:
1 X 3-Row AA5052 Aluminum Radiator
1 X CNC Machined Radiator Cap
Radiator Size:
Brand:ASI Performance
Condition:New
High Performance Racing Spec.
3-Row of tubes Core Racing Design
Petcock Drain:OEM style brass petcock drain
Core Dimensions: 16 6/7″ H x 26 2/9″ W
Overall Dimensions: 18 1/2″ H x 31 5/7″ W
Inlet Diameter: 1-1/2″
Outlet Diameter: 1-4/7″
Trans Cooler Included -1/2″ 20 STRAIGHT THREAD G1/4-
Mount Type: Saddle
Vehicle Fitment:
1977-1980 Chevy C/K Series 10 20 30 Suburban Pickup 26 1/4″ core
1977-1981 Chevrolet Camaro / Caprice 80-86 5.0L 5.7L V8
1978-1987 Chevrolet Camino/ Monte Carlo
1980-1985 Chevy Impala/Nova 1977-1979
1978-1980 Chevrolet K5 Blazer
1977-1980 Chevy G/P Series 10 20 30 Pickup 26 1/4″ core
1978-1983 Chevy Malibu/Oldsmobile Omega 1978 1979
1980-1986 Pontiac Bonneville/Grand LeMans 1978-1980
1978-1981 Pontiac LeMans/Grand Prix 1978-1987
1978-1987 Oldsmobile Cutlass/Cutlass Supreme
1977-1980 GMC C/K C1500 C2500 C3500 Suburban C15 C25 C35
1977-1981 Buick Skylark Regal Century 1978 1987 1979
Please check compatibility (FIT 26 1/4″ WIDE CORE ONLY)
Manufacturer Part Number：162,SBR162,DPI162,CC162,CU162,KKS162
The advantages of our radiator：
Our Radiator is made of AA5052 aircraft aluminum. Its different from other sellers T-3303 Series. In fact, AA5052 series Aluminum is much better than T-3303 series.
More than 90% of aftermarket manufacturers use the T-3303 series Aluminum, because it is cheaper and easier to get the material. However, T-3303 aluminum has many disadvantages, such as poor polishing effect, softness, easiness to scratch and corrode, poor heat dissipation effect. If the T-3303 aluminum radiator is operated in high pressure and high temperature for a long time, the leaking problem would occur very soon.
AA5052 Aluminum is an Al-Mg alloy with good corrosion resistance, excellent reliability and cold workability and strength. The main alloying element of T-5052 is magnesium, which has good forming and processing properties. It is widely used in the manufacture of aircraft fuel tanks, oil pipes, and sheet metal parts of transportation vehicles and ships, hardware products, and electrical-appliance casings.
This AA5052 Aluminum Radiator is designed to provide maximum cooling efficiency to prevent premature engine failure. Its light-weight, and high-heat transferring aluminum features a tube and fin design that, dramatically increases surface area that enables the heat to dissipate more efficiently. This AA5052 Aluminum Radiator is at least 30%-45% more efficient than stock ones. Most importantly, it has a much higher capacity for coolant than stock ones, which means that your cooling system will be more efficient and will be more resistant to temperature surges in racing applications.
1. Made from Aircraft AA5052 grade aluminum for prolonged lifespanand with raw aluminum finish
2. Brazed core technology to guarantee optimum performance and dependability
3. All AA5052 Aluminum 2mm thick tanks and fittings,Ensure it’s hard and durable
4. Billet Aluminum CNC machined fill neck rugged and durable
5. CNC machined cap with Engraved craftsmanship, anodized treatment.
6. OEM style brass petcock drain much better than other plastic one on eBay
7. Carefully crafted to exceptional OE standards for precise fit.
Price: 66.59 USD
1978-82 Regal/G-Body Heater AC Dash Plate Kit
Classic Industries® is a registered trademark. All content on this website is copyrighted. No part of this website, including text, photos, or illustrations may be copied without the prior written permission of Classic Industries®. All Rights Reserved. Copyright © 1994-2024 Classic Industries®
Price: 139.00 USD
Aluminum 3-Row Radiator Fit 78-88 G-Body Monte Carlo El Camino Regal Cutlass DP*
Radiator Configuration:
Material: Aluminium
High Performance Racing Spec.
3-Row of tubes Core Racing Design
Core Dimensions: 17″ H x 26-1/4″ W
Overall Dimensions: 18-1/4″ H x 31-5/8″ W
Upper Inlet 1-1/2″ located on the Driver side
Lower Outlet 1-1/2″ located on the Passenger side
Trans Cooler :￠32×215×G1/4（Z）
This radiator is easy to buy wrong, please check the size before purchase!
Description:
This aluminum radiator is designed to provide maximum cooling efficiency to prevent premature engine failure. Its light-weight, and high-heat transferring aluminum features a tube and fin design that, dramatically increases surface area that enables the heat to dissipate more efficiently. This Aluminum Radiator is at least 40% more efficient than stock ones. Most importantly, it has a much higher capacity for coolant than stock ones, which means that your cooling system will be more efficient and will be more resistant to temperature surges in racing applications.
Fitment：
1970-1981 Chevrolet Camaro 5.7L
1970-1973, 1976-1981 Chevrolet Camaro 5.0L
1970-1971, 1975-1979 Chevrolet Camaro 4.1L
1972-1974 Chevrolet G10 Van 4.1L
1972-1974 Chevrolet G20 Van 4.1L
1972-1974 Chevrolet G20 Van 4.8L
1972-1974 Chevrolet G30 Van 4.1L
1972, 1974 Chevrolet G30 Van 4.8L
1972-1974 GMC G15/G1500 Van 4.1L
1972-1974 GMC G25/G2500 Van 4.1L
1972-1974 GMC G35/G3500 Van 4.1L
1973-1974 Chevrolet Blazer 4.1L
1973-1974 Chevrolet Blazer 4.8L
1973-1974 Chevrolet C10 Pickup 4.8L
1973-1974 Chevrolet C10 Pickup 4.1L
1973-1974 Chevrolet C20 Pickup 4.1L
1973-1974 Chevrolet C20 Pickup 4.8L
1973-1974 Chevrolet C30 Pickup 4.1L
1973-1974 Chevrolet C30 Pickup 4.8L
1973-1974 Chevrolet K10 Pickup 4.1L
1973-1974 Chevrolet K10 Pickup 4.8L
1973-1974 Chevrolet K20 Pickup 4.1L
1973-1974 Chevrolet K20 Pickup 4.8L
1973-1974 Chevrolet K30 Pickup 4.1L
1973-1974 Chevrolet K30 Pickup 4.8L
1973-1974 Chevrolet P10 Van 4.1L
1973-1974 Chevrolet P20 Van 4.1L
1973-1974 Chevrolet P20 Van 4.8L
1973-1974 Chevrolet P30 Van 4.8L
1973-1974 Chevrolet P30 Van 4.1L
1973-1974 GMC C15/C1500 Pickup 4.1L
1973-1974 GMC C15/C1500 Pickup 4.8L
1973-1974 GMC C25/C2500 Pickup 4.1L
1973-1974 GMC C25/C2500 Pickup 4.8L
1973-1974 GMC C35/C3500 Pickup 4.8L
1973-1974 GMC C35/C3500 Pickup 4.1L
1973-1976, 1978-1980 GMC Jimmy 4.1L
1973-1974 GMC Jimmy 4.8L
1973-1974 GMC K15/K1500 Pickup 4.1L
1973-1974 GMC K15/K1500 Pickup 4.8L
1973-1974 GMC K25/K2500 Pickup 4.1L
1973-1974 GMC K25/K2500 Pickup 4.8L
1973-1974 GMC K35/K3500 Pickup 4.1L
1973-1974 GMC K35/K3500 Pickup 4.8L
1974 GMC G25/G2500 Van 4.8L
1974 GMC G35/G3500 Van 4.8L
1975 Buick Apollo 4.3L
1975 Buick Apollo 4.1L
1975 Buick Apollo 5.7L
1975-1979 Buick Skylark 3.8L
1975-1976 Buick Skylark 4.3L
1975-1979 Buick Skylark 5.7L
1975-1976, 1978-1980 Chevrolet K5 Blazer 4.1L
1975-1980 Chevrolet C10 4.1L
1975-1980 Chevrolet C10 4.8L
1975-1980 Chevrolet C20 4.8L
1975-1980 Chevrolet C20 4.1L
1975-1980 Chevrolet C30 4.1L
1975-1980 Chevrolet C30 4.8L
1975-1980 Chevrolet G10 4.1L
1975-1980 Chevrolet G20 4.8L
1975-1980 Chevrolet G20 4.1L
1975-1979 Chevrolet G30 4.8L
1975-1980 Chevrolet K10 4.1L
1975-1976, 1979-1980 Chevrolet K10 4.8L
1975-1976, 1978-1980 Chevrolet K20 4.1L
1975-1980 Chevrolet K20 4.8L
1975-1979 Chevrolet Nova 5.7L
1975 Chevrolet Nova 4.3L
1975-1979 Chevrolet Nova 4.1L
1975-1976, 1980 Chevrolet P10 4.8L
1975-1976, 1980 Chevrolet P20 4.8L
1975-1976, 1980 Chevrolet P30 4.8L
1975-1978 GMC C15 4.8L
1975-1978 GMC C15 4.1L
1975, 1977-1978 GMC C25 4.1L
1975-1978 GMC C25 4.8L
1975-1978 GMC C35 4.8L
1975, 1978 GMC C35 4.1L
1975-1978 GMC G15 4.1L
1975-1978 GMC G25 4.8L
PAYMENT
SHIPPING
RETURNS
FEEDBACK
ABOUT US
Price: 130.49 USD
82 CHEVY EL CAMINO G BODY REAR QUARTER GLASS WINDOWS
82 CHEVY EL CAMINO G BODY QUARTER GLASS
USED CONDITION
Ask as many questions as you like please.
PAYMENT: payment due in 1-3 days of closing of auction
SHIPPING: items ships out within 1-2 business days.
RETURNS: excepted with 5 days of receiving item, please contact me. I do not refund ANY postage, but if there is a problem let me know.
FREE SHIPPING ORDERS WILL BE REFUNDED MINUS MY SHIPPING CHARGES
BUYERS: PLEASE LOOK AT THE PICTURES, READ THE AD, ASK ANY QUESTIONS AND CHECK THE NUMBERS FOR YOUR APPLICATION. YOU ARE RESPONSIBLE FOR MAKING SURE YOU BUY THE RIGHT PART. WE DO NOT GUARANTEE THE PART TO FIT YOUR APPLICATION
We will appreciate very much if you contact us before putting a negative/neutral feedback or open a case in order to take care of any issues regarding your order
Due to a rash of buyers returning their old defective parts in place of my part I have marked every part I ship out. ALL returns must be returned and verified to be my part. Any part deemed fraudulent will not be refunded and a complaint will be filed with eBay. Thank you!
Price: 54.59 USD
Steering Shaft Hooker BlackHeart 71223022HKR For S10 82-93 G-Body 82-88 LS Swap
Payment
We accept PayPal only. If buyer want to delay the payment because of financial problem, please contact me by the ebay message within 3 days.
Payment via PayPal (PayPal accepts all major credits/debit cards and eCheque)
ECheque payment will take 3-10 days to get clear, thus DELAYing the shipment.
Shipping
*Your item will be carefully packed and shipped within ONE business day after payment received.
*Orders are not processed on weekend & holidays.
*Buyer need express mail service or international shipping issues, please contact us before placing the order.
*Local pick-up is unavailable at the moment.
Item may be shipped from the eastern or western
Terms
Feedbacks are important not only to the seller but also buyer as well.
If the transaction is to your liking, a positive feedback& 5star DSR is greatly appreciated. We welcome honest feedbacks.
But please do NOT leave any negative feedbacks before contacting us for resolution. After all, customer satisfaction is our No.1 goal!
Seller is not responsible for any customs duty/import tax, labor cost, expense in a dealer store, or damage due to wrong installation
We afford all cost if it’s our fault. Exchange or refund.
Returns
Return is accepted within 14 days after the buyer’s receiving the item. (Excluding contrived damagement or misusage).
100% money-back Guaranteed!
All product will be tested in 100% before delivery.If the item is defected by the processing of postage,
Buyer has up to 14 days from date of receipt for exchange of a new one.All shipping charges for returned products are to be paid by the buyer,
Please contact us for the return address
Contact Us
All messages will be answered within 24 office hours.
Please contact us either by clicking “contact seller” in the “purchase history” section or simply click “ask a question” at the bottom of this page.
If you are unsatisfied with our item or service, please contact us before leaving any feedback.
We are committed to resolve all issues in a friendly and satisfactory manner.
We always reply to messages within 2 business days (off-duty at weekend).
If you do not get a response from us, then please check your junk or spam mailbox.
