GM 7.5 Inch 10 Bolt Bolt-On Rear Brake Kit

If you dont want to spend and arm and a leg on a rear disc brake kit and still have to weld the bracket on, weve got you covered. This kit includes two bolt-on caliper brackets, two 11-5/8″ vented rotors, two GM metric style calipers, brake pads and hardware.

• 5 on 4-3/4″ bolt circle
• Fits over an axle with a maximum flange diameter of 6″ O.D.
• 2.872″ rotor center hole
• Requires a minimum 14-5/8″ I.D. for caliper clearance
• Brake calipers feature 7/16″-20 inlet thread

Item Details

With Non-Emergency Brake Calipers

This kit is an aftermarket solution. It is not intended to be a direct installation or OEM replacement. Due to changes in production in certain years, your application may require modifications beyond the instructions for this kit to install properly. If your axle shaft flange or axle shaft register exceeds the diameter that clears the rotor dimensions, you will need to machine the axle flange and/or the rotor to clear the diameter required.

Rotor Diameter

11.25 Inch

Notes

Includes rotors, calipers, caliper brackets, brake pads, rotor spacers, and hardware.

Parking Brake Provision

No

Front Spindles Included

No

Master Cylinder Included

No

Brake Booster Included

No

Front Caliper Included

No

Rear Caliper Included

Yes

Rotor Material Type

Cast Iron

Descent set

Summary: Mounting brackets bent under high pressure application. One of the rotors was bent beyond use.

Yes, I recommend this product.

Great product but have to order brake hoses seperate

Summary: Everything was going smoothly on rear disk brake install. Until I got to the part of instructions where it said “install brake hoses and bleed system”. There was no brake hoses in any of the boxes. Called speedway and tech support informed me that the brake hoses I need are sold separately. Sure would have been nice to know that when I ordered kit. Now I’m waiting another 4 or 5 days for ups truck. 😠

Yes, I recommend this product.

Yes.

Summary: I love doing business with you 90% of my rod was built from the Speedway cat. seven years!

Yes, I recommend this product.

I would buy this part again…

Summary: Buy you will not regret it

Yes, I recommend this product.

Installation Notes INCORRECT

Summary: The Rotor you recommend says from a 93 to 97 Camaro, Well that Rotor is 4.65 bolt circle and the 10 Bolt G-Body 84 Monte Carlo is a 4.75 bolt circle. The correct Rotor is from a 92, v8, Camaro which is 4.75 bolt circle and 296 mm or 11.65 inches.

Yes, I recommend this product.