Pair For G Body Buick Regal Grand National Front Header Support Aluminum Bracket

Price: 22.94 USD

Customer satisfaction is very important to us. 

If you have any problems after purchasing, please contact us in time, before opening return or case. Thank you for your support and understanding.

Specifications:

Brand New

Conditions: Brand New

Type: Front Header Support Bracket Kit

Material: Aluminum, High quality and durable

Color: Silver (as pictures shown)

Placement on Vehicle: Front Driver , Front Passenger , Right , Left

Qty: One Right, One Left, A Set Of Two

Warranty: 1 Year

Universal Fitment: For Most G Body Vehicles

Fitments: For G Body Buick Regal and Grand National 1982-1988 Models

Size:

Thickness:  about 1/8″

Vertical Width Top To Bottom: 1.25″

Horizontal Length: 12.5″

Slotted Hole Width: 3/8″

Tools Needed: 10mm deep well socket and wrench. Some may prefer to use an extension.

Package Included:

1 Pair of Front Header Support Bracket Kit ( Right + Left )

Installation Instructions:

1. Before installing this support, please ensure that the header support screws are not peeled off, otherwise installing and removing them will be more difficult.

2. Remove two 10mm nuts from the driver’s or passenger’s side, located above the headlights and behind the header.

3. Install the appropriate bracket on the appropriate side.

4. Each bracket is labeled with the words DRIVE or PASS, indicating the driver or passenger side.

5. Install appropriate brackets on each side and tighten the nuts in place. Do not over tighten.

NOTE:

1.Due to the light and screen difference, the item’s color may be slightly different from the pictures.

2.All dimensions are measured by hand, there may be small deviations.

3.This Is Aftermarket Replacement Item.

4.Please check your correct replacement parts before purchase, the picture show more detail, thank you.

---

On Nov 11, 2024 at 05:12:19 PST, seller added the following information: