Rear Lower Control Arm Relocation Brackets | 1982-2002 GM F-Body

Price: 89.00 USD

Application: 1982-2002 GM F-Body – Camaro & Firebird

Part# 210-S

Fitment Note: These Part# 210-S relocation brackets are designed specifically for installation on a factory, Strange Engineering, or Currie Enterprises rear axle housing. They will NOT fit on a Moser Engineering rear axle housing. Use our Part# 210-M for the Moser application, you can purchase them by searching for Part# 210-M in our eBay Store.

Our rear lower control arm relocation brackets for the 1982-2002 GM F-Body Camaro and Firebird with a Moser rear axle housing re-position your instant center by lowering your rear lower control arm angle for increased traction and anti-squat.

They lower the rear of the control arm up to 3.0″. This product is a must for lowered vehicles to correct your suspension geometry. Lowering your vehicle alters the rear lower control arm angle putting the rear of the control arm higher than the front, this causes massive wheel hop and traction loss.

NON-LOWERED vehicles will also see a dramatic increase in traction by lowering the rearward angle of the control arm with our relocation brackets. The lowered mounting holes are placed in the arc pattern of the factory length control arm, this allows a non-lowered F-Body to drop the rear control arm angle and not require a longer than factory (or adjustable) control arm as all geometry is correctly maintained. The anti-squat performance is providing most users with a full .10 or better 60′ reduction!

Our relocation brackets are CNC laser cut and formed from 3/16″ steel using state-of-the-art CAD/CAM technology for precision tolerances. They must be welded in and all required hardware is included. Since the brackets must be welded in place, we ship them in a bare metal finish. Weld in control arm relocation brackets are the only SAFE and EFFECTIVE way to be installed.

Priced per Pair — Qty. 1 = 1 Pair