Posted on Leave a comment

Subframe Connectors | Bare Metal | 1982-1992 Camaro & Firebird T-Top & Hard Top

Subframe Connectors | Bare Metal | 1982-1992 Camaro & Firebird T-Top & Hard Top
item image
 Buy Now
Facebook Twitter Pinterest

Price: 254.00 USD

Subframe Connectors | Bare Metal | 1982-1992 Camaro & Firebird T-Top & Hard Top



Application: 1982-1992 GM F-Body – Camaro & Firebird (T-Top & Hard Top Cars)

Part# 503M

Put an end to squeaky dashboards, cracking body panels on t-top cars, and seriously enhance your car’s handling and launch performance. When it comes to locking together the chassis on a third generation F-Body Camaro and Firebird, nobody does it better than Spohn Performance!

We don’t consider our kit to be just a point to point sub-frame connection, we provide the components necessary to install a full frame to the underside of your uni-body vehicle.

Our “truss-style” framing system is constructed of 1.75″ x .120″ wall DOM tubing for serious, uncompromised rigidity. The frame rail connects to the rear lower control arm mount and runs the entire length of the rocker panel, it ends at the rear side of the front wheel well. The main shaft is formed to fit the contour of the floor board, providing for weld contact area the entire length of the frame shaft, and no ground clearance loss.

We don’t stop there. Mid-shaft we install a “Y” off frame that connects the main frame shaft to the beefy front sub-frame at the transmission crossmember mounting area. This provides for the ultimate in chassis stiffening by utilizing a triangulated framing design. The frame rails also provide for an excellent jacking point.

This is a weld in system that ships to you in bare metal. If you’ve been looking for the ultimate sub-frame connection system for your third generation F-Body, you just found it!

These SFCs are designed to be used on a single-cat or dual-cat y-pipe exhaust system. The passenger’s side main shaft necks down in the front to allow proper y-pipe clearance. No exhaust or floor board modifications are necessary to install our SFCs.

Priced per Pair — Qty. 1 = 1 Pair

Related Products:

Powder Coated Version: You can purchase these subframe connectors powder coated red or black by searching for Part# 503P in our eBay Store.

Convertible Cars: You can purchase subframe connectors for the convertible by searching for Part# 502 in our eBay Store.

 

Made In USA

See our eBay Store for more 1982-1992 F-Body Camaro & Firebird products!

Item specifics

Condition
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
Brand
Spohn Performance
Country/Region of Manufacture
United States
Placement on Vehicle
Left, Right
Manufacturer Part Number
503M
Universal Fitment
Performance/Custom
Surface Finish
Bare Metal
UPC
614524487096
EAN
Does Not Apply

Posted on Leave a comment

Subframe Connectors | Powder Coated | 1982-1992 Camaro & Firebird Convertible

Subframe Connectors | Powder Coated | 1982-1992 Camaro & Firebird Convertible
item image
 Buy Now
Facebook Twitter Pinterest

Price: 299.00 USD

Subframe Connectors | Powder Coated | 1982-1992 Camaro & Firebird Convertible



Application: 1982-1992 GM F-Body – Camaro & Firebird (Convertible Cars)

Part# 502P

Put an end to squeaky dashboards, cracking body panels, and seriously enhance your car’s handling and launch performance. When it comes to locking together the chassis on a convertible third generation F-Body Camaro and Firebird, nobody does it better than Spohn Performance!

We don’t consider our kit to be just a point to point sub-frame connection, we provide the components necessary to install a full frame to the underside of your uni-body vehicle.

Our “truss-style” framing system is constructed of 1.75″ x .120″ wall DOM tubing for serious, uncompromised rigidity. The frame rail connects to the rear lower control arm mount and runs the entire length of the rocker panel, it ends at the rear side of the front wheel well. The main shaft is formed to fit the contour of the floor board, providing for weld contact area the entire length of the frame shaft, and no ground clearance loss.

We don’t stop there. Mid-shaft we install a “Y” off frame that connects the main frame shaft to the beefy front sub-frame at the transmission crossmember mounting area. This provides for the ultimate in chassis stiffening by utilizing a triangulated framing design. The frame rails also provide for an excellent jacking point.

This is a weld in system that ships to you in your choice of bright red or gloss black powder coating for a brilliant and durable finish. If you’ve been looking for the ultimate sub-frame connection system for your convertible third generation F-Body, you just found it!

These SFCs are designed to be used on a single-cat or dual-cat y-pipe exhaust system. The passenger’s side main shaft necks down in the front to allow proper y-pipe clearance. No exhaust or floor board modifications are necessary to install our SFCs.

Priced per Pair — Qty. 1 = 1 Pair

Specify Color Choice When Ordering:

Color: You must specify red or black when ordering.

Related Products:

Bare Metal Version: You can purchase these subframe connectors in bare metal by searching for Part# 502M in our eBay Store.

T-Top & Hard Top Cars: You can purchase subframe connectors for the t-top and hard top cars by searching for Part# 503 in our eBay Store.

 

Made In USA

See our eBay Store for more 1982-1992 F-Body Camaro & Firebird products!

Item specifics

Condition
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
Brand
Spohn Performance
Country/Region of Manufacture
United States
Placement on Vehicle
Left, Right
Manufacturer Part Number
502P
Universal Fitment
Performance/Custom
Surface Finish
Powder Coated Bright Red or Gloss Black
UPC
614524487072
EAN
Does Not Apply

Posted on Leave a comment

Tubular Subframe Connectors (SFCs) – Mild Steel | 1993-2002 GM F-Body

Tubular Subframe Connectors (SFCs) – Mild Steel | 1993-2002 GM F-Body
item image
 Buy Now
Facebook Twitter Pinterest

Price: 199.00 USD

Tubular Subframe Connectors (SFCs) – Mild Steel | 1993-2002 GM F-Body



Application: 1993-2002 GM F-Body – Camaro & Firebird (Except Convertible)

Part# 504

Our tubular subframe connectors for the 1993-2002 GM F-Body Camaro and Firebird run tight against the floor pan with NO ground clearance loss. They are invisible when looking at the vehicle from the side, you have to literally lay on the ground to see them!

This design also allows for welding the mounting plates to the front and rear subframes and optionally you can weld them along the entire length of the SFC to the floor pan for optimum rigidity.

They’re constructed of 1.75″ x .120″ wall DOM tubing and CNC laser cut 3/16″ steel mounting plates. The total weight of the SFCs (pair) is only 17.5 pounds!

They’re available powder coated in your choice of bright red or gloss black for a brilliant and durable finish.

Fitment Note: Will not fit convertible cars.

Priced per pair — Qty. 1 = 1 Pair

Specify Color Choice When Ordering:

Color: You must specify red or black when ordering.

Made In USA

 

See our eBay Store for more 1993-2002 F-Body Camaro & Firebird products!

Item specifics

Condition
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
Manufacturer Part Number
504
Placement on Vehicle
Left, Right
Surface Finish
Powder Coated Bright Red or Gloss Black
Country/Region of Manufacture
United States
Brand
Spohn Performance
Installation Type
Weld In
Universal Fitment
Performance/Custom