Price: 7.99 USD
1978-88 G Body Seat Track Front Trim Cover Dark Blue Monte Carlo Regal Cutlass
Price: 161.99 USD
78-88 G Body Side Bullet Mirror RH Cutlass Regal Monte Carlo El Camino Remote
Good+ Condition very light wear See Pics, shipping to US only, Free Shipping.
Price: 299.95 USD
G BODY FENDER BRACE KIT
The GP G Body Fender Brace Kit is made out of billet aluminum and design to be a direct replacement for the original two fender rods that go from the inner fender to the core support. The brace kit gives you some extra support along with adding style to your engine bay!
Some cars have the nut insert on the inner fender like the Cutlass or the El Camino from factory. For those with out, you will have to drill a hole on the inner fender and use the nut and bolt provide. All mounting hardware is included.
fits 1979-1988
Buick regal
cutlass
monte Carlo
El Camino
grand prix
Price: 36.50 USD
1978-1988 GM G Body Rear Axle Control Arm Bushings. Pair.
1977-1988 GM Rear Control Arm Bushings (Pair)
2 pair needed per Car
Fits
Buick:
1978-1981 Century;
1978-1987 Regal, Grand National, GNX, & T-Type
Chevrolet:
1978-1987 El Camino;
1978-1983 Malibu;
1978-1988 Monte Carlo
1982-1988 Camaro
GMC:
1978-1987 Caballero
Oldsmobile:
1978-1981 Cutlass;
1978-1984 Cutlass Calias;
1980-1983 Cutlass Cruiser;
1978-1987 Cutlass Salon;
1978-1988 Cutlass Supreme
Pontiac:
1978-1980 Grand Am;
1978-1981 Lemans;
1978-1982 Grand Lemans;
1978-1987 Grand Prix;
1982-1986 Bonneville
1982-1988 Firebird;
Application is Greater than Listed
A Quality Reproduction brought to you by CARS
Serving the Hobby Since 1973
We Ship Worldwide – Same Day Shipping
CARS LLC
205 Pearl Street
Neshanic Station, NJ 08853
Price: 790.00 USD
5″ to 7″ Monte Carlo, Cutlass, El Camino, Regal – G Body Custom Donk Lift Kit!
Price: 178.99 USD
1978-88 Buick Regal; G Body T-Top Windshield A Pillar Assembly; LH Drivers Side;
Classic Industries® is a registered trademark. All content on this website is copyrighted. No part of this website, including text, photos, or illustrations may be copied without the prior written permission of Classic Industries®. All Rights Reserved. Copyright © 1994-2025 Classic Industries®
Price: 449.99 USD
78-88 GM G Body Car 2.5″ Dual Exhaust Kit Flowmaster Super 44 Rear Exit No Tip
This kit for your OEM to higher horsepower set ups. The 2.5″ pipes are aluminized to increase the life and mandrel bent which is sure to increase exhaust flow, change the exhaust note, and boost performance! The exhaust pipes exit directly out of the rear of the car. *Product disclaimer: THIS IS NOT A COMPLETE “DO IT YOURSELF” kit. This can be installed with basic tools. It is recommended that this kit be installed by a professional. Fabrication WILL be required. Any type of suspension or wheel/tire modifications may affect system clearances. Additional parts or fabrication will likely be required. *This kit is intended for custom purposes
Price: 9.99 USD
16 pc kit 78-87 GM G body Control Arm Suspension Alignment Shim new
THESE ARE THE SAME KIND YOUR CHEVY CAME WITH FROM THE FACTORY. IF YOU ARE REBUILDING THE FRONT SUSPENSION ON YOUR CHEVY THEN YOU WILL NEED TO PUT SHIMS BACK IN IT BEFORE YOU TAKE IT TO THE ALIGNMENT SHOP. THIS KIT COMES WITH ENOUGH SHIMS TO DO BOTH BOLTS ON EACH UPPER CONTROL ARM.
FITS: all GM cars 1978-87
Price: 26.99 USD
1 Pair For G Body Buick Regal Grand National Front Header Support Bracket 1/8″
Features:
Condition: Brand New & High Quality
Item Type: Front Header Support Bracket
Material: Aluminum With Thickness of about 1/8″
Placement on Vehicle: Front Driver and Passenger
Vertical Width Top To Bottom: 1.25″
Horizontal Length: 12.5″
Slotted Hole Width: 3/8″
Color: As Picture Shown
Fitment:
For Buick Regal and Grand National 1982-1988 Models
Package Included:
1 Pair Header Support Bracket
Installation Instructions:
First remove the two 10mm nuts from either the driver or passenger side which are located above the headlights and behind the header.
Install the proper bracket for the appropriate side.
Each support bracket is marked with the words DRIVE or PASS for the proper driver or passenger side.
Install the proper support bracket on each side and snug the nuts back in place.
Do not overtighten.
Be sure your header support screws are not stripped before installing this support piece or it will be more difficult to install and remove them.
PAYMENT
You can use the following payment methods such as PayPal、Google Pay、Visa、Master Card、Amex and Discover to pay.
SHIPPING
Shipping Fee is include packing & handling charges.
International Customers:Import duties, taxes, and Other charges are NOT INCLUDED in the item price or shipping charges. These charges are the buyer’s responsibility and vary by country/location.
if you have not received it within 30 days, Please contact us first, we will arrange to resend or refund to you.Please do not open case or leave bad feedback for us before contact. We will really appreciate that.
Terms of Sale
ABOUT US
Best sevice is the key to make we stand out.
We are a store specializing in motorcycle accessories, with more than 2,000 products, you can find what you want.
We have poweful partner factory to sure our price can be the best.
We have professional team to care about every piece of fairing sale from us.
Price: 149.11 USD
78-87 GM G Body Weatherstrip Kit Trunk Door Roof Rail Molded Rubber Seals L/R pr
|
