Tag: currie

 Buy Now
  

Price: 3,399.99 USD

You are bidding on a Brand New Currie Enterprises Rear End with 31 Spline Axles with Wilwood Disc Brake Kit including Drilled Rotors & Black Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part #GMG7887X-K6).  Currie Crate Rear Ends are designed to be a bolt-in upgrade.

Fits:

• Chevrolet:
  • 1978-1987 El Camino, Malibu, Monte Carlo, and Station Wagon
• Buick:
  • 1978-1987 Grand National and Regal
• GMC:
  • 1978-1987 Caballero
• Oldsmobile:
  • 1978-1987 Cutlass, Cutlass Salon, 4-4-2, and Station Wagon 
• Pontiac:
  • 1978-1987 Grand Prix and Station Wagon

Includes:

• Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (Currie #CE-GMG7887X)
  • 9-Plus notchback heavy duty housing
  • 31 Spline performance axle package
  • Built to the stock overall width (58″) and pinion offset specs
    • 58″ is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on
  • All stock suspension brackets are installed in the stock location for an easy bolt in installation, and urethane upper control arm bushings are installed in the upper control arm housing brackets.
  • Housing includes all 3rd member studs installed
  • These are 9″ Ford center sections, so they do require a 9″ Ford 3rd Member (sometimes referred to as a Chunk);  if you don’t currently have one, we do offer them in several ratios here
  • Axles include:
    • Stock 5 x 4 3/4″ wheel bolt pattern
    • 12mm Wheel studs installed
    • 1/4″ Thick heavy-duty bearing retainer plates
    • Tapered Timken style wheel bearings pressed on
  • The Axle flanges on this rear end are the Big Bearing Ford (New Style), also known as “Torino”, which fit the Wilwood brakes perfectly
• Wilwood 11″ Disc Brake Kit with Drilled Rotors and Black Calipers (Wilwood Part #140-11389-D): 
  • Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications.
  • Dynapro Low-Profile Pro-Series rear disc brake kits provide a complete solution for popular muscle car rear axle.  Forged billet Dynapro Low-Profile four-piston calipers, 11″ one-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking
  • These Low-Profile Brake kits require at least 15″ diameter wheels
  • Brake Kit includes:
    • Drilled & Slotted, .810″ Thick x 11.00″ O.D. Rotors with Hats
      • Featuring 5 x 4 1/2″, 5 x 4 3/4″, and 5 x 5″ bolt patterns
    • Low-Profile 4 Piston Dynapro Calipers – Black
    • Drum Parking Brake Assemblies with Caliper Mounting Brackets
    • Bearing Retainers
    • BP-10 Smart Compound Brake Pads
    • All Bolts, Washers, and Shims necessary to install the complete braking system on both rear wheels
  • You can view and download the complete assembly instruction booklet for this brake kit here
  • This listing includes the Wilwood kit with Black Calipers and 11″ Drilled Rotors.  We also offer the Wilwood kits with different options, including Black, Red, and Polished calipers, with both standard and drilled/slotted rotors in 3 different sizes.  You can see all of the options below.  Just let us know if you would like to upgrade to one of these other kits:
    • You can see all of the 11″ kits here.
    • You can see all of the 12″ kits here.
    • You can see all of the 13″ kits here.
• Parking Brake Cable Kit:
  • Connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission
• Flexline Kit:
  • Steel braided brake lines, caliper fittings, and chassis fittings to connect the calipers to the hard lines
  • Also includes weld-on line tabs to install on your rear end
• Hard Line Kit:
  • Steel hard brake line tubing to connect the chassis fittings to the included rubber hose
  • Rubber hose connects those hard lines to the line on the frame
  • Note: Tubing bending is generally necessary for the installation of these lines

In Our Ebay Store, we have:

• This same setup with:
  • Standard Rotors and Black Calipers
  • Standard Rotors and Red Calipers
  • Drilled Rotors and Red Calipers
• Similar Kits with
  • Currie Drum Brake Kits:
    • 10″
    • 11″
  • Currie Disc Brake Kits:
    • Standard Rotors
    • Drilled Rotors
• All of these items individually
• Along with hundreds of other Rear End options

We have many other Currie Products and Wilwood Products in our Ebay store.

We also have thousands of other High Performance Parts in our store.

Shipping:

There is no faster shipping on Ebay.  If you pay for the item by 5:00 Eastern, Monday-Friday, we will ship it the same day.  If it’s after 5:00 EST, we will ship it the next business day.  If you pay for the item on the weekend, we will ship it out Monday.

Ebay now requires that sellers put a “handling time” on each item and “1 Business Day” is the shortest listed option.  WE DON’T HAVE A HANDLING TIME.  We ship same day in accordance with the paragraph above.  No delays here.  We want you to have the parts as bad as you do. 

We will be glad to ship internationally. Just send us a message for an international shipping quote.

Accepted payment methods:

We accept Paypal. If buyer doesn’t have a Paypal account, he or she can pay with Visa, Mastercard, or Discover through seller’s merchant account.

 Buy Now
  

Price: 3,099.99 USD

You are bidding on a Brand New Currie Enterprises Rear End with 31 Spline Axles with Currie Disc Brake Kit, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part #GMG7887X-K2).  Currie Crate Rear Ends are designed to be a bolt-in upgrade.

Fits:

• Chevrolet:
  • 1978-1987 El Camino, Malibu, Monte Carlo, and Station Wagon
• Buick:
  • 1978-1987 Grand National and Regal
• GMC:
  • 1978-1987 Caballero
• Oldsmobile:
  • 1978-1987 Cutlass, Cutlass Salon, 4-4-2, and Station Wagon 
• Pontiac:
  • 1978-1987 Grand Prix and Station Wagon

Includes:

• Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (Currie #CE-GMG7887X)
  • 9-Plus notchback heavy duty housing
  • 31 Spline performance axle package
  • Built to the stock overall width (58″) and pinion offset specs
    • 58″ is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on
  • All stock suspension brackets are installed in the stock location for an easy bolt in installation, and urethane upper control arm bushings are installed in the upper control arm housing brackets.
  • Housing includes all 3rd member studs installed
  • These are 9″ Ford center sections, so they do require a 9″ Ford 3rd Member (sometimes referred to as a Chunk);  if you don’t currently have one, we do offer them in several ratios here
  • Axles include:
    • Stock 5 x 4 3/4″ wheel bolt pattern
    • 12mm Wheel studs installed
    • 1/4″ Thick heavy-duty bearing retainer plates
    • Tapered Timken style wheel bearings pressed on
  • The Axle flanges on this rear end are the Big Bearing Ford (New Style), also known as “Torino”, which fit the Currie brakes perfectly
• Currie 11″ Disc Brake Kit (Currie Part #CE-6012E6): 
  • Currie brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications.
  • These Brake kits require at least 15″ diameter wheels
  • Brake Kit includes:
    • 0.50″ Thick x 11.00″ O.D. Solid Rotors with Hats
      • Featuring both 5 x 4 1/2″ and 5 x 4 3/4″ bolt patterns
    • Single Piston Brake Calipers with Pads
    • Backing Plate / Caliper Mounting Bracket Plates with Drum-Style Parking Brake Assemblies installed
    • Necessary bolts, nuts, and registers to install the braking system on both rear wheels
• Parking Brake Cable Kit:
  • Connects to the Currie Parking Brake Assemblies, then comes together to join the stock cable behind the transmission
• Flexline Kit:
  • Steel braided brake lines, banjo fittings & bolts, and chassis fittings to connect the calipers to the hard lines
  • Also includes weld-on line tabs to install on your rear end
• Hard Line Kit:
  • Steel hard brake line tubing to connect the chassis fittings to the included rubber hose
  • Rubber hose connects those hard lines to the line on the frame
  • Note: Tubing bending is generally necessary for the installation of these lines

In Our Ebay Store, we have:

• This same setup with:
  • Currie Drilled Rotors
• Similar Kits with
  • Currie Drum Brake Kits:
    • 10″
    • 11″
  • This rear end with Wilwood Disc Brake Kits:
    • Standard Rotors and Black Calipers
    • Standard Rotors and Red Calipers
    • Drilled Rotors and Black Calipers
    • Drilled Rotors and Red Calipers
• All of these items individually
• Along with hundreds of other Rear End options

We have many other Currie Products in our Ebay store.

We also have thousands of other High Performance Parts in our store.

Shipping:

There is no faster shipping on Ebay.  If you pay for the item by 5:00 Eastern, Monday-Friday, we will ship it the same day.  If it’s after 5:00 EST, we will ship it the next business day.  If you pay for the item on the weekend, we will ship it out Monday.

Ebay now requires that sellers put a “handling time” on each item and “1 Business Day” is the shortest listed option.  WE DON’T HAVE A HANDLING TIME.  We ship same day in accordance with the paragraph above.  No delays here.  We want you to have the parts as bad as you do. 

We will be glad to ship internationally. Just send us a message for an international shipping quote.

Accepted payment methods:

We accept Paypal. If buyer doesn’t have a Paypal account, he or she can pay with Visa, Mastercard, or Discover through seller’s merchant account.

 Buy Now
  

Price: 3,399.99 USD

You are bidding on a Brand New Currie Enterprises Rear End with 31 Spline Axles with Wilwood Disc Brake Kit including Drilled Rotors & Red Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part #GMG7887X-K7).  Currie Crate Rear Ends are designed to be a bolt-in upgrade.

Fits:

• Chevrolet:
  • 1978-1987 El Camino, Malibu, Monte Carlo, and Station Wagon
• Buick:
  • 1978-1987 Grand National and Regal
• GMC:
  • 1978-1987 Caballero
• Oldsmobile:
  • 1978-1987 Cutlass, Cutlass Salon, 4-4-2, and Station Wagon 
• Pontiac:
  • 1978-1987 Grand Prix and Station Wagon

Includes:

• Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (Currie #CE-GMG7887X)
  • 9-Plus notchback heavy duty housing
  • 31 Spline performance axle package
  • Built to the stock overall width (58″) and pinion offset specs
    • 58″ is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on
  • All stock suspension brackets are installed in the stock location for an easy bolt in installation, and urethane upper control arm bushings are installed in the upper control arm housing brackets.
  • Housing includes all 3rd member studs installed
  • These are 9″ Ford center sections, so they do require a 9″ Ford 3rd Member (sometimes referred to as a Chunk);  if you don’t currently have one, we do offer them in several ratios here
  • Axles include:
    • Stock 5 x 4 3/4″ wheel bolt pattern
    • 12mm Wheel studs installed
    • 1/4″ Thick heavy-duty bearing retainer plates
    • Tapered Timken style wheel bearings pressed on
  • The Axle flanges on this rear end are the Big Bearing Ford (New Style), also known as “Torino”, which fit the Wilwood brakes perfectly
• Wilwood 11″ Disc Brake Kit with Drilled Rotors and Red Calipers (Wilwood Part #140-11389-DR): 
  • Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications.
  • Dynapro Low-Profile Pro-Series rear disc brake kits provide a complete solution for popular muscle car rear axle.  Forged billet Dynapro Low-Profile four-piston calipers, 11″ one-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking
  • These Low-Profile Brake kits require at least 15″ diameter wheels
  • Brake Kit includes:
    • Drilled & Slotted, .810″ Thick x 11.00″ O.D. Rotors with Hats
      • Featuring 5 x 4 1/2″, 5 x 4 3/4″, and 5 x 5″ bolt patterns
    • Low-Profile 4 Piston Dynapro Calipers – Red
    • Drum Parking Brake Assemblies with Caliper Mounting Brackets
    • Bearing Retainers
    • BP-10 Smart Compound Brake Pads
    • All Bolts, Washers, and Shims necessary to install the complete braking system on both rear wheels
  • You can view and download the complete assembly instruction booklet for this brake kit here
  • This listing includes the Wilwood kit with Red Calipers and 11″ Drilled Rotors.  We also offer the Wilwood kits with different options, including Black, Red, and Polished calipers, with both standard and drilled/slotted rotors in 3 different sizes.  You can see all of the options below.  Just let us know if you would like to upgrade to one of these other kits:
    • You can see all of the 11″ kits here.
    • You can see all of the 12″ kits here.
    • You can see all of the 13″ kits here.
• Parking Brake Cable Kit:
  • Connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission
• Flexline Kit:
  • Steel braided brake lines, caliper fittings, and chassis fittings to connect the calipers to the hard lines
  • Also includes weld-on line tabs to install on your rear end
• Hard Line Kit:
  • Steel hard brake line tubing to connect the chassis fittings to the included rubber hose
  • Rubber hose connects those hard lines to the line on the frame
  • Note: Tubing bending is generally necessary for the installation of these lines

In Our Ebay Store, we have:

• This same setup with:
  • Standard Rotors and Black Calipers
  • Standard Rotors and Red Calipers
  • Drilled Rotors and Black Calipers
• Similar Kits with
  • Currie Drum Brake Kits:
    • 10″
    • 11″
  • Currie Disc Brake Kits:
    • Standard Rotors
    • Drilled Rotors
• All of these items individually
• Along with hundreds of other Rear End options

We have many other Currie Products and Wilwood Products in our Ebay store.

We also have thousands of other High Performance Parts in our store.

Shipping:

There is no faster shipping on Ebay.  If you pay for the item by 5:00 Eastern, Monday-Friday, we will ship it the same day.  If it’s after 5:00 EST, we will ship it the next business day.  If you pay for the item on the weekend, we will ship it out Monday.

Ebay now requires that sellers put a “handling time” on each item and “1 Business Day” is the shortest listed option.  WE DON’T HAVE A HANDLING TIME.  We ship same day in accordance with the paragraph above.  No delays here.  We want you to have the parts as bad as you do. 

Shipping cost will be $99.99 via UPS Ground within the continental United States.  If you buy 2 or more of our auctions, shipping will certainly be combined to save you money.  We will be glad to ship internationally.  Just send me a message for an international shipping quote.

Accepted payment methods:

We accept Paypal. If buyer doesn’t have a Paypal account, he or she can pay with Visa, Mastercard, or Discover through seller’s merchant account.

 Buy Now
  

Price: 3,299.99 USD

You are bidding on a Brand New Currie Enterprises Rear End with 31 Spline Axles with Wilwood Disc Brake Kit including Red Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part #GMG7887X-K5).  Currie Crate Rear Ends are designed to be a bolt-in upgrade.

Fits:

• Chevrolet:
  • 1978-1987 El Camino, Malibu, Monte Carlo, and Station Wagon
• Buick:
  • 1978-1987 Grand National and Regal
• GMC:
  • 1978-1987 Caballero
• Oldsmobile:
  • 1978-1987 Cutlass, Cutlass Salon, 4-4-2, and Station Wagon 
• Pontiac:
  • 1978-1987 Grand Prix and Station Wagon

Includes:

• Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (Currie #CE-GMG7887X)
  • 9-Plus notchback heavy duty housing
  • 31 Spline performance axle package
  • Built to the stock overall width (58″) and pinion offset specs
    • 58″ is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on
  • All stock suspension brackets are installed in the stock location for an easy bolt in installation, and urethane upper control arm bushings are installed in the upper control arm housing brackets.
  • Housing includes all 3rd member studs installed
  • These are 9″ Ford center sections, so they do require a 9″ Ford 3rd Member (sometimes referred to as a Chunk);  if you don’t currently have one, we do offer them in several ratios here
  • Axles include:
    • Stock 5 x 4 3/4″ wheel bolt pattern
    • 12mm Wheel studs installed
    • 1/4″ Thick heavy-duty bearing retainer plates
    • Tapered Timken style wheel bearings pressed on
  • The Axle flanges on this rear end are the Big Bearing Ford (New Style), also known as “Torino”, which fit the Wilwood brakes perfectly
• Wilwood 11″ Disc Brake Kit with Standard Rotors and Red Calipers (Wilwood Part #140-11389-R): 
  • Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications.
  • Dynapro Low-Profile Pro-Series rear disc brake kits provide a complete solution for popular muscle car rear axle.  Forged billet Dynapro Low-Profile four-piston calipers, 11″ one-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking
  • These Low-Profile Brake kits require at least 15″ diameter wheels
  • Brake Kit includes:
    • .810″ Thick x 11.00″ O.D. Rotors with Hats
      • Featuring 5 x 4 1/2″, 5 x 4 3/4″, and 5 x 5″ bolt patterns
    • Low-Profile 4 Piston Dynapro Calipers – Red
    • Drum Parking Brake Assemblies with Caliper Mounting Brackets
    • Bearing Retainers
    • BP-10 Smart Compound Brake Pads
    • All Bolts, Washers, and Shims necessary to install the complete braking system on both rear wheels
  • You can view and download the complete assembly instruction booklet for this brake kit here
  • This listing includes the Wilwood kit with Red Calipers and 11″ Standard Rotors.  We also offer the Wilwood kits with different options, including Black, Red, and Polished calipers, with both standard and drilled/slotted rotors in 3 different sizes.  You can see all of the options below.  Just let us know if you would like to upgrade to one of these other kits:
    • You can see all of the 11″ kits here.
    • You can see all of the 12″ kits here.
    • You can see all of the 13″ kits here.
• Parking Brake Cable Kit:
  • Connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission
• Flexline Kit:
  • Steel braided brake lines, caliper fittings, and chassis fittings to connect the calipers to the hard lines
  • Also includes weld-on line tabs to install on your rear end
• Hard Line Kit:
  • Steel hard brake line tubing to connect the chassis fittings to the included rubber hose
  • Rubber hose connects those hard lines to the line on the frame
  • Note: Tubing bending is generally necessary for the installation of these lines

In Our Ebay Store, we have:

• This same setup with:
  • Standard Rotors and Black Calipers
  • Drilled Rotors and Black Calipers
  • Drilled Rotors and Red Calipers
• Similar Kits with
  • Currie Drum Brake Kits:
    • 10″
    • 11″
  • Currie Disc Brake Kits:
    • Standard Rotors
    • Drilled Rotors
• All of these items individually
• Along with hundreds of other Rear End options

We have many other Currie Products and Wilwood Products in our Ebay store.

We also have thousands of other High Performance Parts in our store.

Shipping:

There is no faster shipping on Ebay.  If you pay for the item by 5:00 Eastern, Monday-Friday, we will ship it the same day.  If it’s after 5:00 EST, we will ship it the next business day.  If you pay for the item on the weekend, we will ship it out Monday.

Ebay now requires that sellers put a “handling time” on each item and “1 Business Day” is the shortest listed option.  WE DON’T HAVE A HANDLING TIME.  We ship same day in accordance with the paragraph above.  No delays here.  We want you to have the parts as bad as you do. 

Shipping cost will be $99.99 via UPS Ground within the continental United States.  If you buy 2 or more of our auctions, shipping will certainly be combined to save you money.  We will be glad to ship internationally.  Just send me a message for an international shipping quote.

Accepted payment methods:

We accept Paypal. If buyer doesn’t have a Paypal account, he or she can pay with Visa, Mastercard, or Discover through seller’s merchant account.