Price: 839.00 USD
Extreme Duty Rear Traction Bars | 1994-2001 Dodge Ram 1500 4×4
Application: 1994-2001 Dodge Ram 1500 4×4
Part# D94-02-RTB-QCSB-G1500
Fitment Notes: These rear traction bars are a 100% direct no drill bolt in using existing factory holes on Quad Cab Short Bed trucks. For trucks other than a Quad Cab Short Bed you will need to drill holes in the frame for the front mounting brackets and fish the nuts inside of the boxed frame, or weld the front mounting brackets to the side of the frame rail. The 1500 trucks re-use the factory rear u-bolts. The u-bolts that are pictured are not included with this kit (those are for 2500 trucks).
Eliminate that nasty wheel hop and shudder caused by rear leaf spring axle wrap that is a common problem on the Dodge Ram 4×4, especially with larger, higher traction tires.
Our Extreme Duty rear traction bars can withstand the tremendous torque loads generated by high torque engines and large tires, and help maintain tire contact with the road.
With our design, the traction bar’s rear end attachment points are incorporated into the rear u-bolt mounts and the front mounts attach to existing frame holes for a 100% bolt in installation (see fitment notes above). To further enhance strength and rigidity, the traction bar’s mounting bushings are supported on both sides inside of double shear brackets.
We use an extremely strong and rigid greaseable Delrin® bushing in the front mount and our exclusive Del-Sphereâ„¢ pivot joint for the rear mount. When the springs are not being evenly compressed, such as when you’re turning or driving off-road, a twisting force is transmitted through the traction bars and into their mounts. The Del-Sphereâ„¢ pivot joints prevent these destructive torsional loads from stressing the truck’s frame.
Additionally, they provide much better handling and a noise free ride. The Del-Sphereâ„¢ pivot joints thread into the traction bars which allows for length adjustments for lifted trucks as well as the ability to adjust pre-load. Our traction bar system provides a nice and quiet ride, unlike traction bars equipped with noisy spherical rod ends like most others on the market.
Unlike most rear traction bars on the market that use a single tube design, our rear traction bars are built like a truss. This design prevents tube flex under load, remember that these bars are over 8′ long and have a very high torque load applied to them. Our main beam is 1.50″ x .120″ wall DOM and the formed truss tube and braces are 1.25″ x .120″ wall DOM, completely jig built and precision MIG and TIG welded.
We use TIG welded 4130 chrome moly threaded tube adapters for maximum thread strength. Our rear u-bolt traction bar mount is CNC laser cut and formed from 1/4″ steel plate. You will re-use your factory rear u-bolts and our rear mounting bracket simply bolts right underneath your factory’s lower u-bolt mounting saddle.
The front traction bar mount is CNC laser cut and formed from 3/16″ steel plate and features a triangulated design for maximum strength and durability under extreme loads. It bolts in place using existing frame holes (see fitment notes above) and all necessary mounting hardware (Grade 8) is supplied.
The entire assembly is available powder coated in your choice of bright red or gloss black for a brilliant and durable finish.
Build Specifications & Features:
- (2) Truss shaped traction bars with 1.50″ x .120″ wall DOM main beams, 1.25″ x .120″ wall DOM formed truss tubes and braces.
- TIG welded 4130 chrome moly threaded tube adapters for maximum thread strength.
- (2) CNC laser cut and formed 1/4″ steel rear u-bolt traction bar mounts.
- (2) CNC laser cut and formed 3/16″ steel triangulated front traction bar frame mounts.
- (2) Delrin® bushed front mounts and (2) Del-Sphere™ pivot jointed rear mounts (all equipped with grease fittings).
- All required mounting hardware is included (Grade 8).
- Powder coated in your choice of bright red or gloss black for a brilliant and durable finish.
Priced per Pair — Qty. 1 = 1 Pair
Specify Color Choice When Ordering:
Color: You must specify red or black when ordering.
See our eBay Store for more 1994-2001 Dodge Ram components!
Item specifics
-
Condition
-
-
Brand
-
Spohn Performance
-
Manufacturer Part Number
-
D94-02-RTB-QCSB-G1500
-
Placement on Vehicle
-
Rear
-
Country/Region of Manufacture
-
United States
-
Surface Finish
-
Powder Coated Bright Red or Gloss Black
-
Front Bushing Type
-
Delrin® Bushings
-
Rear Bushing Type
-
Del-Sphere™ Pivot Joints
-
Fitment Type
-
Performance/Custom
![[SR] Heavy Duty SBC Solid Engine Motor Mount Clamshells FOR 1978-1988 GM G-Body](https://shop.gbodyforum.com/wp-content/uploads/2025/02/36780-sr-heavy-duty-sbc-solid-engine-motor-mount-clamshells-for-1978-1988-gm-g-body.jpg)
