Posted on Leave a comment

Spohn SP-615 78-87 GM G-Body Rear Upper Adj Control Arms w/ Del-Sphere Joint BLK

Spohn SP-615 78-87 GM G-Body Rear Upper Adj Control Arms w/ Del-Sphere Joint BLK
item image
 Buy Now
Facebook Twitter Pinterest

Price: 209.00 USD

Spohn SP-615 78-87 GM G-Body Rear Upper Adj Control Arms w/ Del-Sphere Joint BLK

Spohn SP-615 78-87 GM G-Body Rear Upper Adj Control Arms w/ Del-Sphere Joint BLACK

***PICTURE IS RED BUT IF YOU ORDER FROM THIS LISTING, YOU WILL GET BLACK***

Our adjustable rear upper control arms for the 1978-1987 G-Body cars outperform the flexible, stamped-steel arms and soft rubber bushings that come from the factory.

Eliminate wheel hop and increase traction with an easy bolt on installation. The adjustability feature allows for setting the pinion angle. Our right hand and left hand threaded CNC machined male/female double adjuster allows for easy on-car adjustments, no need to unmount the control arm to make adjustments!

The control arm bushings on G-Body vehicles have a significant impact on your vehicle’s ride, comfort, handling, acceleration, noise and vibration.

When the vehicle leans (rolls) in a turn, one side of the chassis moves up relative to the rear axle and the other side moves down. The control arms must twist to allow for the axle to articulate, this causes the control arm bushings to bind.

If this bind becomes excessive, it will raise the rear wheel rate and produce sudden and uncontrolled changes in handling such as snap oversteer.

The factory minimizes this suspension bind by using compliant rubber bushings. These soft bushings help accommodate the necessary motion of the control arms during body roll.

However, the rubber bushings do not provide much in the way of forward and aft support which can cause wheel hop during hard acceleration and braking.

It is common to replace the stock rubber control arm bushings with polyurethane bushings to resolve the shortcomings of the factory’s soft rubber bushings. Polyurethane bushings eliminate wheel hop, reduce axle deflection, and improve straight line traction.

However, the downside of polyurethane bushings is they prevent the necessary movement of the control arms during body roll, which in turn produces significant binding in the suspension when the vehicle is cornering.

The polyurethane bushings also place high stresses on the control arm mounts on the vehicle. Polyurethane bushed control arms do not allow for rotation of the control arm during cornering because of the stiffness of the bushings.

Del-Sphere Pivot Joints:

The Spohn Performance Del-Sphere pivot joint solves the shortcomings of the factory rubber and aftermarket polyurethane bushings. Our Del-Sphere pivot joint incorporates a spherical ball which is surrounded by Delrin bushing cups.

This combination allows the bar to articulate like a spherical rod end (28 degrees of available rotation) during cornering but the spherical ball does not allow the bushing to deflect. Therefore the bar remains completely bind free like a spherical rod end during cornering for predictable traction in the corners.

Think of the Del-Sphere pivot joint as a Delrin bushed spherical rod end. After over a year of R&D testing here at Spohn Performance on a streetable spherical joint the Del-Sphere pivot joint is the final result. Designed and manufactured exclusively by Spohn Performance, we have taken street suspension performance to the next level.

Our Del-Sphere pivot joint features a one piece forged and heat treated chrome moly housing, a heat treated and chrome plated chrome moly spherical ball, Delrin bushing cups, heat treated retainer washer and snap ring, heat treated and chrome plated chrome moly threaded adjuster ring, an external grease fitting and a beautiful silver zinc plated housing finish.

The Delrin bushing cups absorb shock and road noise so you get the quiet and smooth ride of a bushing as well as 28 degrees of rotation! Our Del-Sphere pivot joints will always ship to you fully assembled, however, we also offer an optional adjusting tool that will allow you to do two things.

First, you can disassemble the Del-Sphere pivot joint for cleaning, inspection, etc. Second, you can adjust the amount of friction on the spherical ball. Do you want a very low friction pivot joint or a very tight pivot joint? It’s up to you, the amount of tension can be easily adjusted by using our optional adjustment tool to tighten or loosen the end retainer ring.

What that also means is if over time and miles the tolerances open up you can simply re-adjust the retainer ring and have your pivot joint as tight as it was the day it was brand new. We doubt you’ll ever need to replace the Delrin bushing cups, but they certainly can be. Unlike a spherical rod end, the Del-Sphere pivot joint is 100% rebuildable.

What is Delrin, and why did you choose to use it? Delrin is an acetal homopolymer made by DuPont. It is characterized as having an excellent combination of physical properties that make it suitable for numerous applications.

With extremely low moisture absorption and a low coefficient of friction (self-lubricating), Delrin is uniquely tailored for wear applications in high humidity or moisture environments. Delrin will maintain constant physical properties under high moisture conditions and out-perform nylon or polyurethane under these conditions. Delrin has a 10,000 psi tensile strength and a 120 Rockwell Hardness rating making it ideal for our Del-Sphere application.

Build Specifications:

  • 3/4″ Del-Sphere Pivot Joints
  • Right hand and left hand threaded CNC machined and silver zinc plated 4140 chrome moly double adjuster threads into 4130N chrome moly TIG welded threaded tube adapters
  • Ship to you jig set at OEM length
  • Extended length CNC laser cut and formed 1/4″ steel mounting brackets fit all OEM and aftermarket rear ends
  • Re-uses OEM mounting hardware, no need to drill out your car’s mounting bracket holes.
  • These are the highest quality, easiest to adjust on the car rear upper control arms on the market!
  • Available powder coated in your choice of the above colors for a brilliant and durable finish

Priced per Pair — Qty. 1 = 1 Pair

SHIPPING IS 10.95 in the continental US. AK, HI, PR and all others must email for actual shipping cost. 

Item specifics

Condition
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
OE/OEM Part Number
615
Manufacturer Part Number
615
Brand
Spohn

Posted on Leave a comment

1978 – 1988 Gm G Body Regal Monte Cutlass Grand Prix Power Door Lock Actuators

1978 – 1988 Gm G Body Regal Monte Cutlass Grand Prix Power Door Lock Actuators
item image
 Buy Now
Facebook Twitter Pinterest

Price: 65.00 USD

1978 – 1988 Gm G Body Regal Monte Cutlass Grand Prix Power Door Lock Actuators

This is a set of power lock actuators from a low mileage 1984 ultimate Cutlass that was parted out. These have been tested and are in good shape for the age and come with the plug for them. Be sure to check out all my listings, thanks. (3)

Item specifics

Condition
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is …
OE Spec or Performance/Custom
OE Spec
Brand
GM
Manufacturer Warranty
Yes
Manufacturer Part Number
Does Not Apply
Country/Region of Manufacture
United States
Placement on Vehicle
Left

Posted on Leave a comment

Fit For 1978-1988 G-Body A/C Air Temp Blend Door Pivot Lever Arm Balck 1Pcs

Fit For 1978-1988 G-Body A/C Air Temp Blend Door Pivot Lever Arm Balck 1Pcs
item image
 Buy Now
Facebook Twitter Pinterest

Price: 6.45 USD

Fit For 1978-1988 G-Body A/C Air Temp Blend Door Pivot Lever Arm Balck 1Pcs

Item Description

Title: Air Temp Blend Door Pivot Lever Arm

Description:

This is the part the control unit that the temperature control cable to the blend air door attaches to as a pivot point.

Located on the inside box behind your dash board on the passenger side

When you open your glove box door and look behind it you will see this pivot & retainer assembly by your duct work.

The pivot arm also has white retainer snapped into it that the blend air door rod snaps into.

(White Retainer Not Included – See our other Listings) 

Turn clock wise to pull up and remove the broken pivot unit.

Application:

Fits the following GM A & G Body 2 & 4 Door models where 

Fit For 1978 – 1983  Chevrolet:  Malibu

Fit For 1978 – 1988  Chevrolet:  Monte Carlo  /  SS

Fit For 1978 – 1987  Chevrolet:  El Camino

Fit For 1978 – 1987  GMC:   Caballero

Fit For 1978 – 1987  Buick:  Regal   /  Grand National 

Fit For 1978 – 1980  Buick:  Century

Fit For 1978 – 1988  Oldsmobile:  Cutlass   /  442

Fit For 1978 – 1987  Pontiac:  Grand Prix 

Fit For 1978 – 1980  Pontiac:  Grand Am

Fit For 1978 – 1981  Pontiac:  LeMans / Grand LeMans

Color: As the picture

Package Includes:

1 Air Temp Blend Door Pivot Lever Arm

Note:

All of the items in our shop will come to you with the tracking number.

30 Days money back,

Please notify us within 30 days after you’ve received your purchased item.

All return requests must be submitted through your eBay account.

If your order has been received and it is not what you ordered, or if your item has a manufacturer defect, please contact us as soon as possible,and then we will give you a resolution as soon as possible.

Items to be returned must be in resalable condition,30 Days money back, please notify us within 30 days after you’ve received your purchased item.

Welcome to transmotor 2014 ’s eBay Store.

We specialize in automotive car parts and is the No.1 industry distributor for affordable and quality products. Our inventory is one of the largest and been consistently selling on eBay for a decade. You can tell by our feedback that we’ve been doing this for many years and have the expertise to accommodate your every needs.

transmotor 2014 has the most complete catalog of silicone hose kits,we also Provide Custom Made hose kits to fit your special needs at no additional cost if you provide sample to our US address or China factory address.

24 Hours On line,

If you have any question,please don’t be hesitated to contact us .We always strive for 100% customer satisfaction. With your support, we will make a progress everyday, we always grow up with you.

Standard Order Processing time:



All items will ship within 24 hours (Monday – Friday).

Payment cleared/received on Friday will be shipped on the next business days (Monday or Tuesday)

We are not responsible for carrier transit time. This information is provided by the carrier and excludes weekends and holidays. Note that transit times may vary, particularly during peak periods or in climate weather conditions, and that delivery times frames will need to be extended for any processing time frames in excess of 1-2 business days.

International Shipping:



International buyers are responsible for possible customs fees, brokerage fees or duty fees. We would appreciate for understanding of tracking number would not be updated in between the city of departing in the U.S. and the city of destination.

Double check shipping address.

We are not responsible for any changes to address after item has been shipped.

Transaction will be held until a full shipping amount received.

Customer assumes shipping charges incurred in shipping to undeliverable address.

Please use Shipping & Payments tab on top of page for shipping details for your location.

International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country’s customs/border regulations. Please contact customs for more information.

Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.

Item specifics

Condition
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
Brand
transmotor2014
Manufacturer Part Number
TRA739172
Manufacturer Warranty
1 Year
Emails Reply
Within 1 Business Day During Business Hours
Easy & Hassle Free Returns
Yes
Business Hours
Sunday-Friday 5pm-2am PST
30 Day Money Back Guarantee
Yes
Return Shipping Charges
Free For Lower 48 States
UPC
Does not apply

Posted on Leave a comment

G BODY STATION WAGON RR AIR DEFLECTOR & HINGES Malibu Lemans 1978 1979 1980 1981

G BODY STATION WAGON RR AIR DEFLECTOR & HINGES Malibu Lemans 1978 1979 1980 1981
item image
 Buy Now
Facebook Twitter Pinterest

Price: 450.00 USD

G BODY STATION WAGON RR AIR DEFLECTOR & HINGES Malibu Lemans 1978 1979 1980 1981

ATTENTION!!! If you have less than 25 positive feedbacks or if you have not been on e-bay for at least 1 year, you need to contact me prior to bidding.  I will cancel any bids/transactions with new accounts unless you contact me prior to bidding.  This is due to scams involving new accounts.  If you have any questions about this, the part listed, or shipping, you can call me.

six two zero seven eight six four four two eight

My advertised prices include all e-bay charges, listing, final value, and payment fees.  Original rear air dam with upper glass hinges for a late 70’s-early 80’s era GM G Body station wagon.  The air dam is not chipped or broken and it will refinish nicely.  The hinges are not broken, but the chrome is getting thin in spots.  Hard to find, original piece selling as is.

Check us out on Facebook under Nobody Elses Auto and Nobodys Show on Facebook or YouTube.

BE SURE TO CLOSELY EXAMINE ALL PICTURES.  USE THE E-BAY FEATURES THAT ALLOW PICTURES TO BE BLOWN UP SO YOU CAN EXAMINE ALL ASPECTS OF THIS PARTS.  I CANNOT BE RESPONSIBLE FOR PEOPLE WHO DO NOT FULLY READ THE DESCRIPTION AND CLOSELY EXAMINE ALL PICTURES.  Refunds/Returns will be considered if I missed something that is not picture or described, but I am not responsible for buyers who miss something because they didn’t pay attention to all of the posted information.  I am not responsible for buyers who “pay to much” for a part on an auction listing.

See my other auctions for more old parts.  My number for more questions is [phone removed by eBay].

*****SEE ALL PAYMENT AND SHIPPING TERMS BELOW PRIOR TO BIDDING, ESPECIALLY FOR PARTS THAT REQUIRE FREIGHT SHIPPING.  IF THERE IS SOMETHING YOU ARE NOT CLEAR ON, YOU CAN ALWAYS CALL ME FOR MORE DETAILS.*****

I cannot discuss parts that are not listed on e-bay on an e-bay e-mail.  I am only allowed to discuss the parts that are currently listed on e-bay e-mails.  E-mails about parts other than currently listed parts will not be answered.  I delete e-mails almost every day about parts that I have in stock because the request was sent on an e-bay message.  I know I can list a part someone asks about at a later time, but with hundreds of cars in stock and dozens of e-mails a day on parts, that is not possible.

48 STATES ONLY

I only sell in the 48 states.  I ONLY ship to the 48 states to buyers with US ADDRESSES AND US BANK ACCOUNTS.  This is due to buyers who try to “bend” the rules to get around auction restrictions.  Just because you are trying to use a buddies address in the 48 states, that does not fix the extra fees paypal charges for payments from out of the US.  Since almost ALL of my Neg. FB’s over the last few years have come from buyers out of the US trying to “bend” the rules, I have been forced to do this.  As long as you have a US address with a US back acct., everything will work just as the system is designed.  If you do have a US bank acct. and you are using a third party in the US to ship to and handle your packages, it will be at the buyers risk.  I will not assume any responsibility for damage for any item that goes through a third party.

MY BUSINESS STRUCTURE

I have been selling classic cars and parts for over 25 years.  I have hundreds of cars in stock.  I get dozens of e-mails and phone calls every week on parts.  E-mails that are not clear about what you want to know, I don’t have time to answer.  Questions must be clear and to the point about the part and what you want to know and I will get back to you.  I don’t have time to try and guess what you want to know.  I ship a lot of parts every week.  Only a small fraction of my inventory ever ends up on e-bay.  I have my own UPS acct, I DO NOT SHIP THROUGH E-BAY because only part of what I sell is on e-bay.  That means you need to contact me directly with any shipping questions.

PAYMENT

I do accept paypal for payment, but I will not accept payments that are e-checks or have un-confirmed shipping addresses or non-verified payments.  Any payments that are flagged with any of these issues,  will be cancelled.  This is due to the way paypals system works. 

SHIPPING COSTS

My shipping quotes are designed to cover my costs of shipping.  This is obviously designed to cover the cost of shipping, but it includes several other items also.  This includes gathering and storing boxes from local body shops, tape, supplies, and a lot of time.  Buyers also need to remember e-bay is also now charging final value fees on shipping costs.  This was due to people listing items at a low price and making up the difference with extra high shipping.  These extra expenses trickle all the way down the pipe and must be taken into consideration when I decide what the starting price is on an auction.  If the shipping price on the auction is not acceptable, don’t bid on the part.  I am not getting rich on freight, but I am not going to lose money on it either.

SHIPPING

The only reason my shipping time is so long is because I am tired of e-mails from people who do not understand that weekends and holidays are NOT working days.  My normal shipping day is Friday every week and as long as the part is paid for by Thurs night, I will ship it that Friday.  With the exception of Holidays, I almost always ship on Fridays.  Anything paid for by Thurs. night will be processed for Fridays shipment.  Anything paid for after Thurs. night will not ship until the following Friday.  If I am out of town on a Friday, I will catch up any shipments from the past week on the following Mon. or Tues.  I do combine shipping AS LONG AS THE ITEMS CAN BE SHIPPED TOGETHER SAFELY!  Standard shipping takes 8-10 WORKING days.  Weather conditions do affect shipping and can delay shipments.  I use UPS and USPS for shipping.  Buyers can always pick up here also.

Freight shipments have to be scheduled for pickup, so freight goes out whenever it is ready and I can get a pickup scheduled.

SHEETMETAL

Sheetmetal typically has to be shipped Frt.  Smaller pieces may go standard or oversized UPS, it will just depend on the piece.  However it is shipped, there is always the possibility of dings, dents, or rolled corners or edges in shipping.  The only way to avoid the possibility of any dents or damage is to have the part or parts crated.  Crating is up to the buyer and the buyer is responsible for the extra charges.  The shipping quote that I will give you will only cover boxing a part,  crating is extra and the buyers responsibility.  Crating starts at $100.00 per order and goes up from there depending on the order.

FREIGHT SHIPPING

Large items such as fenders, doors, hoods, etc. will usually need to be shipped UPS oversized or by truck lines.  Some items are better shipping oversized UPS, some have to go truck lines.  There is no way to determine the actual shipping costs until the part is packaged.  Items that will go oversized UPS can be delivered to residential addresses and will usually ship for $100.00-$150.00.  Items that are too large for UPS oversized, will have to go UPS freight.  

Freight does require a commercial business address for the best rates.  Addresses are checked using Google maps.  Only addresses located in accessible business districts are considered commercial, the garage behind your house is not.  There are additional charges for residential deliveries.  Residential deliveries also REQUIRE and phone number so the freight company can make delivery arrangements with you. 

Freight shipping usually runs around $140.00 for a commercial address and $190.00 for residential.  Those numbers can fluctuate, but that is about what freight shipping has been lately on sheetmetal.  I do NOT have Greyhound here.

Heavy parts such as engines, trans, etc. will have to be quoted individually.

VEHICLES AND CABS

Buyers have 60 days of free outside storage at the buyers risk.  After 60 days, a storage fee will apply.  If storage fees exceed the purchase price, the vehicle/cab ownership will return to me.  Buyers are responsible for all shipping costs and arrangements.  I do have names and number of transporters that have been here before that I can forward on to interested buyers. 

Item specifics

Condition
Used

An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. See all condition definitionsopens in a new window or tab

Seller Notes
“CLOSELY EXAMINE AND ENLARGE ALL PICS FOR A CLEAR DESCRIPTION OF THE PART. I CANNOT BE RESPONSIBLE …
Brand
chevy
UPC
Does not apply

Posted on Leave a comment

QA1 BW02-GMG1 Big Wheel G-Body Suspension Kit Level 2 For Chevy Monte Carlo NEW

QA1 BW02-GMG1 Big Wheel G-Body Suspension Kit Level 2 For Chevy Monte Carlo NEW
item image
 Buy Now
Facebook Twitter Pinterest

Price: 5,753.95 USD

QA1 BW02-GMG1 Big Wheel G-Body Suspension Kit Level 2 For Chevy Monte Carlo NEW

Fitment and Product Information:

QA1 BW02-GMG1 Big Wheel G-Body Suspension Kit Level 2 For 1978-1988 Chevy Monte Carlo

Product Details:

  • Brand Name: QA1 Precision Products
  • Manufacturer Part Number: BW02-GMG1
  • UPC Code: 806990169341
  • Country of Origin: USA

Specifications:

  • Front Coil Springs Included: Yes
  • Rear Coil Springs Included: Yes
  • Rear Leaf Springs Included: No
  • Front Shocks/Struts Included: Yes
  • Front Shock Type: Double adjustable coilover
  • Rear Shocks/Struts Included: Yes
  • Rear Shock Type: Double adjustable coilover
  • Front Sway Bar Included: Yes
  • Front Sway Bar Color: Black hammertone powdercoated
  • Front Sway Bar Type: Hollow
  • Front Sway Bar Diameter (in.): 1.375 in. in.
  • Rear Sway Bar Included: Yes
  • Rear Sway Bar Finish: Black hammertone powdercoated
  • Rear Sway Bar Type: Hollow
  • Rear Sway Bar Diameter (in.): 1.250 in. in.
  • Tie Rod Sleeves Included: Yes
  • End Link Bushings Included: Yes
  • Rear Leaf Spring Bushings Included: No
  • Sway Bar Bushings Included: Yes
  • Upper Trailing Arms Included: Yes
  • Lower Trailing Arms Included: Yes
  • Trailing Arm Mount Braces Included: Yes
  • Panhard Bar Included: Yes
  • Torque Arm Included: Yes
  • Upper Control Arms Included: Yes
  • Lower Control Arms Included: Yes
  • Control Arm Style: Tubular
  • Control Arm Material: Steel
  • Control Arm Color: Black
  • Front Strut Tower Bar Included: No
  • K-Member Included: No
  • K-Member Support Brace Included: No
  • Rear Strut Tower Bar Included: No
  • Subframe Connectors Included: No
  • Chassis Stiffener Included: No
  • Calipers Included: No
  • Rotors Included: No
  • Brake Pads Included: No
  • Brake Lines Included: No
  • Wheel Studs Included: No
  • Center Link Included: No
  • Spindles Included: No
  • Inner Tie Rod Ends Included: Yes
  • Outer Tie Rod Ends Included: Yes
  • Bushing Material: Polyurethane
  • Bushing Color: Black
  • Mounting Hardware Included: Yes
  • Quantity: Sold as a kit.

Application Summary:

  • 1978-1988 Chevy Monte Carlo

Item specifics

Condition
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
Brand
QA1 Precision Products
Interchange Part Number
QAP_BW02-GMG1
Warranty
See Description For Details
Manufacturer Part Number
BW02-GMG1
Performance Part
Yes
UPC
806990169341

Posted on Leave a comment

9.4102G Body Cab Mount Bushing Cushion Universal Kit for Car Rod Frame Truck

9.4102G Body Cab Mount Bushing Cushion Universal Kit for Car Rod Frame Truck
item image
 Buy Now
Facebook Twitter Pinterest

Price: 33.99 USD

9.4102G Body Cab Mount Bushing Cushion Universal Kit for Car Rod Frame Truck

9.4102G Universal Polyurethane Body Mounts Bushings Isolators, Include 4 Plated Metal Washers, 2 Plated Metal Sleeves, 4 Body Mount Bushings(Black)

Fitment

Universal Mount (Item model: 9.4102G). Fit for cars, trucks, hot rods and racing and competition vehicles – yet designed to be also used for street vehicles. It can be purchased according to the size.

Material:

 Made of high-quality rubber and steel, firm and stable, with compression resistance and impact resistance.

Feature

9.4102G body bushings ride between the frame and body, cushioning road and engine vibrations from the body. True performance application components for cars, trucks, hot rods, and racing and competition vehicles — but also designed for street vehicles. Runs soft enough to dampen vibrations for street use. Replacing the original, short-lived and too soft rubber mounts and obsolete those hard-running metal motor mounts.

PRODUCT DESCRIPTION:

  • 1. The body mounts are made of high-quality polyurethane, for use as isolator mounts on vehicals, provides amazing performance for any vehicle that uses it.
  • 2. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
  • 3. Universal transmission and motor mounts cab/body and bed mounts restorations daily drivers custom bodies or “kit cars”. Also can be used for air compressors tool boxes generators independent engines, etc.
  • 4. Replaces distorted and worn-out original rubber mounts.

PACKAGE INCLUDES:

  • 2 Mounts
  • 4 Washers
  • 4 Bushings

Item Specifics
Brand : Unbranded
Manufacturer Warranty : 1 Year
MPN : Does Not Apply
Type : Body Mounting Bushing Kit
Color : Black
OE/OEM Part Number : 9.4102G
Quantity : 10
Material : Aluminum, Rubber
Manufacturer Part Number : VMVGN01250S
Items Included : 4x Bushings, 4x Washers, 2x Mounts
Item Weight : 1.98 lb
Fitment Type : For cars, trucks, hot rods and racing and competition vehicles

We accept Payoneer/Paypal/Google Pay/Visa/Master Card/Amex/Discover for Payment.



Item specifics

Condition
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
UPC
Does not apply
Brand
Unbranded
Manufacturer Warranty
1 Year
MPN
Does Not Apply
Type
Body Mounting Bushing Kit
Color
Black
OE/OEM Part Number
9.4102G
Quantity
10
Material
Aluminum, Rubber
Manufacturer Part Number
VMVGN01250S
Items Included
4x Bushings, 4x Washers, 2x Mounts
Item Weight
1.98 lb
Fitment Type
For cars, trucks, hot rods and racing and competition vehicles

Posted on Leave a comment

1986-1988 Cutlass Monte Carlo Regal Body Intermediate Tail Light Wiring Harness

1986-1988 Cutlass Monte Carlo Regal Body Intermediate Tail Light Wiring Harness
item image
 Buy Now
Facebook Twitter Pinterest

Price: 49.99 USD

1986-1988 Cutlass Monte Carlo Regal Body Intermediate Tail Light Wiring Harness

Wire harness from a 1987 Cutlass that connects the fusebox to the tail light harness, running down the driver side rocker into the trunk. Good used shape. Will fit many 78-88 GM g-body vehicles. Please check your application to be sure this works for you. 

Item specifics

Condition
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is …

Posted on Leave a comment

1978-1988 Oldsmobile Cutlass Tach Gauge Cluster Hurst Olds G Body Wire Harness

1978-1988 Oldsmobile Cutlass Tach Gauge Cluster Hurst Olds G Body Wire Harness
item image
 Buy Now
Facebook Twitter Pinterest

Price: 249.99 USD

1978-1988 Oldsmobile Cutlass Tach Gauge Cluster Hurst Olds G Body Wire Harness

1978-1988 Oldsmobile Cutlass Tach Gauge Cluster Hurst Olds G Body Wire Harness

HARD TO FIND ORIGINAL CLASSIC CAR & TRUCK PARTS

Original GM tach cluster with full gauge package for the G Body Cutlass.  It is untested and the volt gauge is showing a shortened needle.  This looks to be a very worthy restoration project.  Per eBay policy this item has not been tested so it is listed as for parts not only working.  Expect it to need work prior to usage or installation, do not expect to plug it in and work perfectly.  Unless otherwise noted this is a used part. A used part may have dust, dirt, old paint, scratches or cracks. These are not new parts unless noted so please set your expectations accordingly. See pictures for condition and wear as we rely heavily on photos. Applications are based upon various sources, although I try to make sure research is correct it can be flawed so please verify your applications. Please use a PC to take advantage of the zoom feature as it will provide much greater detail than a portable device. Free shipping is to the lower 48 states only. If you live in Alaska, Hawaii, Puerto Rico or any other US territory please contact us directly for a shipping quote.

Thank you for allowing me to share my passion with you.  I have thousands of original car and truck parts available in my store.  Please save me as a seller and search my store for other hard to find classic car and truck parts. 

​​​​​​​

Thanks,

Dave 

Payment

Shipping

Returns

We accept all approved forms of payment through eBay. 

All of our packages are professionally packed with a custom made box from recycled cardboard.  This will take a little longer but you’ll be pleased with the care that was taken with your part.

We offer a 30 day return policy. 

© Copyright Product88 2020 | All Rights Reserved

Original GM tach cluster with full gauge package for the G Body Cutlass. It is untested and the volt gauge is showing a shortened needle. This looks to be a very worthy restoration project. Per eBay policy this item has not been tested so it is listed as for parts not only working. Expect it to need work prior to usage or installation, do not expect to plug it in and work perfectly. Unless otherwise noted this is a used part. A used part may have dust, dirt, old paint, scratches or cracks. These are not new parts unless noted so please set your expectations accordingly. See pictures for condition and wear as we rely heavily on photos. Applications are based upon various sources, although I try to make sure research is correct it can be flawed so please verify your applications. Please use a PC to take advantage of the zoom feature as it will provide much greater detail than a portable device. Free shipping is to the lower 48 states only. If you live in Alaska, Hawaii, Puerto Rico or any other US territory please contact us directly for a shipping quote.

HARD TO FIND ORIGINAL CLASSIC CAR & TRUCK PARTS

1978-1988 Oldsmobile Cutlass Tach Gauge Cluster Hurst Olds G Body Wire Harness

Original GM tach cluster with full gauge package for the G Body Cutlass.  It is untested and the volt gauge is showing a shortened needle.  This looks to be a very worthy restoration project.  Per eBay policy this item has not been tested so it is listed as for parts not only working.  Expect it to need work prior to usage or installation, do not expect to plug it in and work perfectly.  Unless otherwise noted this is a used part. A used part may have dust, dirt, old paint, scratches or cracks. These are not new parts unless noted so please set your expectations accordingly. See pictures for condition and wear as we rely heavily on photos. Applications are based upon various sources, although I try to make sure research is correct it can be flawed so please verify your applications. Please use a PC to take advantage of the zoom feature as it will provide much greater detail than a portable device. Free shipping is to the lower 48 states only. If you live in Alaska, Hawaii, Puerto Rico or any other US territory please contact us directly for a shipping quote.

Thank you for allowing me to share my passion with you.  I have thousands of original car and truck parts available in my store.  Please save me as a seller and search my store for other hard to find classic car and truck parts. 

​​​​​​​

Thanks,

Dave 

We accept all approved forms of payment through eBay. 

All of our packages are professionally packed with a custom made box from recycled cardboard.  This will take a little longer but you’ll be pleased with the care that was taken with your part.

We offer a 30 day return policy. 

© Copyright Product88 2020 | All Rights Reserved

Item specifics

Condition
For parts or not working

An item that does not function as intended and is not fully operational. This includes items that are defective in ways that render them difficult to use, items that require service or repair, or items missing essential components. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab

Seller Notes
“Check out my other listings for more rare old muscle car parts. Maybe this part is what you need …
Brand
General Motors
Type
Instrument Cluster
Manufacturer Part Number
25016635
Superseded Part Number
08082403
1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 Oldsmobile
Oldsmobile Cutlass Tach Gauge Cluster Hurst Olds G Body Wiring
Country/Region of Manufacture
United States
Vintage Part
Yes
Performance Part
No

Posted on Leave a comment

Holley Sniper EFI 12-306 In-Tank Electric Fuel Pump LS Swap 78-87 G-Body 255 LPH

Holley Sniper EFI 12-306 In-Tank Electric Fuel Pump LS Swap 78-87 G-Body 255 LPH
item image
 Buy Now
Facebook Twitter Pinterest

Price: 419.95 USD

Holley Sniper EFI 12-306 In-Tank Electric Fuel Pump LS Swap 78-87 G-Body 255 LPH



CLICK HERE

 


Holley Sniper EFI 12-306 In-Tank Electric Fuel Pump LS Swap 78-87 G-Body 255 LPH

HLY12-306



WAS $467.00

BUY IT NOW for only $419.95!

• This in-tank fuel pump module is a high-pressure unit that flows 255 liters per hour (LPH) and is capable of supporting electronic fuel injection (EFI) engines producing up to 550 horsepower

• A pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for this application is included

• This module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates

Fuel pressure is

internally regulated to 58 psi eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator – no separate return line is required because this module returns excess fuel right inside the tank! This 1978-87 G-body Muscle Car EFI Fuel Pump module was designed as a direct replacement for your factory pick-up and sending unit. There is no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line – just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line. This Muscle Car EFI Module includes a 255 LPH fuel pump and a Holley HydraMat. HydraMat is an amazing patent-pending fuel reservoir system that reduces fuel starvation issues that might otherwise occur while cornering, accelerating, stopping, traversing inclines, and during low fuel conditions.





ABOUT HOLLEY EFI

Holley is quickly becoming The New Standard In EFI! Holley’s HP ECU is standard equipment on the 2013/2014 Chevrolet COPO Camaro and Holley’s EFI throttle body powers every NASCAR Sprint Cup Series™ team. Top racers are making the switch to Holley EFI every day. Racers like Tom Bailey who set three new records and took the overall event win on the 2013 Hot Rod Magazine Drag Week and John Scali who used it to win the 2013 JEGS All Star race. But that’s not all. The world’s best street machine builders and tuners are making the switch to Holley EFI. Builders like Dave Lane who used Holley EFI to power the 2013 Goodguys Hot Rod of the Year and tuners like Steve Morris who use it to build some of the baddest forced induction beasts on the planet. It’s the easiest, most refined, feature-rich system that money can buy. But, don’t take our word for it, see what the best are saying about Holley EFI!


We Feature all of these great products from the Holley family!


About Us:
Karl Kustoms strives to provide the highest level of customer satisfaction. Our central location in Des Moines, Iowa offers top quality products at affordable prices to all automotive enthusiasts in the continental United States. The showroom offers the unique experience for customers to touch and feel the performance products they are purchasing and learn more about the Chevrolet Performance line. Our warehouse is home to over 650 engines and transmissions that are shipped from our location every day. Most orders ship same day & deliver to the contiguous 48 states.




Shop with confidence! Karl Kustoms is a Top Rated Plus Seller!

Store Policies:

Fitment

  • Please see the “Compatibility” link at the top of the listing. Fitment information may not be available for all products and those without fitment will not have a Compatibility link.  
  • IMPORTANT – Please be sure to view the “Notes” option for important details if it is available.

Shipping – FAST ‘N FREE (Most Items)

NOTE: All international orders are shipped via eBay’s Global Shipping Program. You will see your order has been “Delivered” to Pitney Bowes in Erlanger, KY. You will receive an updated tracking number once it ships from Pitney Bowes.

  • Please see the “Shipping and Payment” tab or the top of the listing for shipping costs.
  • We do not ship to APO/FPO or Post Office box addresses on eBay.
  • We use FedEx or USPS for most orders.  We are unable to guarantee a specific carrier.
  • Orders placed before 3PM Monday-Friday will generally ship the same day.

Payment –

  • We offer eBay Managed Payments for all transactions. All items purchased require immediate payment.  
  • Please use the eBay cart for multiple purchases, so shipping can be combined.
  • All orders ship with an itemized invoice. We are unable to send an order without an invoice.
  • All taxes are collected and remitted by Iowa customers will be charged sales tax in Iowa (6%). State taxes will be calculated at checkout.

Returns

  • We offer returns within 30 days of purchase. Items may be returned within 30-days of purchase for a refund or exchange, if in new and unused condition.
  • Buyer pays return shipping.
  • If you have received the wrong item, or a damaged item, please contact us before leaving feedback. Our goal is to ensure our customers are taken care of.
  • IMPORTANT – Buyer MUST obtain an RMA Prior to sending the item back.

Customer Support – Over 50 Years of Combined Experience!

  • Our customer support team is available 24/7.
  • Please send us a message before ordering, if you are unsure an item will work for your application.

Powered by SixBit

Powered by SixBit’s eCommerce Solution

Item specifics

Condition
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is …
Brand
Holley
Type
Fuel Pump
Fuel Type
Gasoline
Drive Type
Electrical
Items Included
Sending Unit
Manufacturer Part Number
12-306
OE/OEM Part Number
N/A
Fuel Pump Type
Electrical
Placement on Vehicle
Fuel Tank
Voltage
12 V
Flow Rate
67 gph
Fuel Level Sender Resistance
0-90 ohm
Pressure
58 psi (3.999 bar)
Liters Per Hour (LPH)
255
UPC
90127057902

Posted on Leave a comment

1978 – 1987 G Body MONTE MALIBU A/C HEATER HEAT HVAC CONTROL UNIT

1978 – 1987 G Body MONTE MALIBU A/C HEATER HEAT HVAC CONTROL UNIT
item image
 Buy Now
Facebook Twitter Pinterest

Price: 175.00 USD

1978 – 1987 G Body MONTE MALIBU A/C HEATER HEAT HVAC CONTROL UNIT

This is a heater AC control from a low mileage 1979 Chevy Monte Carlo that was parted out. This worked perfect when removed from the car. This is in good shape for the age and comes as pictured. Be sure to check out all my listings, thanks.

Item specifics

Condition
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is …
Brand
GM
Manufacturer Part Number
7895785
Vintage Part
Yes