Looking for loaded Cutlass tubular control arms for your car lift kit application?
Universal Car Lifts fully adjustable tubular upper control arms with bushings and ball joints installed are used in car lifting applications to prevent the upper A arm from hitting the frame when a lift cup or lift spring are used. This will give your car more lift and a better, safer ride quality.
Front control arms with bushings & ball joints installed for your 1978-1988 G Body application
These Cutlass tubular control arms fit a variety of applications based on the General Motors G Body platform. This includes 78-88 Buick Regal, 78-81 Buick Century, 78-88 Chevy El Camino, 78-83 Chevy Malibu, 78-88 Chevy Monte Carlo, 78-88 Oldsmobile Cutlass, 82-86 Pontiac Bonneville, 78-80 Pontiac Grand Am, 78-87 Pontiac Grand Prix, 78-81 Pontiac Lemans and 78-87 Gmc Caballero . For more information on the fitment applications for these front control arms, check out the fitment guide table bellow.
Expertly made to correct your lifted suspension geometry
Our Cutlass tubular control arms are specifically designed for lifted car applications. The arms have an improved clearance profile and will give you extra room when lifting your ride. The ball joint angle is improved and will prevent binding commonly seen with lifted car applications.
- ● Prevents your upper control arm from hitting the frame
- ● Improved ball joint angle prevents your ball joint shaft from breaking
- ● Corrects “negative camber” where your wheel tilts inwards at the top
- ● Improved caster design for better handling
- ● Includes bushings installed in the arms
- ● Includes new heavy duty cross shafts installed in the arms
- ● Save time during installation
- ● Easier to install than bare arms guaranteed
These Cutlass tubular control arms come ready to install. We include the Bushings pressed in with brand new cross shafts. We also include heavy duty ball joints installed in the arms. Saves you hours of time and hassle during installation.
UCL arms ride the best and give you the best handling out of any front control arms on the market. Keep your suspension in check with products designed by experienced engineers.
Universal car lifts Cutlass tubular control arms are built for extreme duty use
Our front upper control arms with bushings and ball joints installed are designed to be the heaviest duty and most durable on the market. We start with an over-sized 1-1/2″ diameter round tubing that is mated to an extra thick precision cut ball joint plate. The arms feature cross supports that are welded solid between the arm legs to form an extremely durable product that will last a lifetime.
- ● Extreme duty 1-1/2″ diameter tube construction
- ● Extra thick ball joint plates are beefier than the competition
- ● Cross supports that tie the arms together for extra strength
- ● Durable powder coat finish doesn’t rust
- ● Lifetime warranty on all components
UCL Cutlass tubular control arms are finished in a durable gloss black powder coating that is the same type of coating new vehicles come with. Beware of cheap “Knock-off Brand” parts that have crappy welds and are spray painted in some dudes mom’s garage. These arms will rust almost instantly. The rusted arms will then fail and leave your car stranded or worse. Insist on a durable black powder coat finish for years of trouble free use. Our customers tell us UCL parts are the best quality all the time. Just check out our eBay feedback and you will see the difference.
We are so confident in our quality that we offer a lifetime warranty on all Universal Car Lifts manufactured parts. An industry first, our lifetime commitment means you can rest assured your ride is hooked up with the best parts money can buy. If you ever have a problem, simply contact us for a free replacement. We don’t replace parts often because our parts work right the first time, every time.
Cutlass aftermarket control arms with bushings & ball joints installed
Are you looking for front control arms that are fast and easy to install? Don’t want to deal with using an H press to put your arms together? UCL front control arms with bushings, balljoints and cross shafts installed are hands down the easiest to install tubular control arms on the market.
- ● 4x Brand new bushings are pressed into the arms
- ● 2x New threaded offset cross shafts are included, with hardware installed
- ● 2x New heavy duty ball joints are included and installed
- ● All parts torqued to proper specifications
- ● Front control arms are ready to install on your ride
- ● Saves hours during installation
- ● Customers recommend these arms over all others for ease of use
We are confident that you will be satisfied with the quality and ease of installation of this product. Our front A arms with bushings, ball joints and cross shafts installed are what you need to do a professional lift job the easy way.
Best price guarantee and easy to reach technical support
UCL is the largest manufacturer and supplier of car lifts in the world. We were the first company to lift cars and have been doing it now for over 20 years. We offer a best price guarantee. If you find a better price on an identical product, we will beat it. We want your business and will do what it takes to get it.
Our technicians have a combined 50+ years of custom suspension experience. We have built everything from lifted cars to low riders to hydraulics, bags, lifted trucks, euros, exotics, Japanese and pretty much everything else you can think of. Our company has specialized in lifted cars for the last 20+ years and have more expertise here than anyone else.
UCL technical support is available extended business hours to make sure your lift project is a success. Give us a ring by clicking “Contact Us” and then “Other”. Our phone number should be displayed. You can also look us up online. Send us a message and we will get back to you right away with a solution.
Recent Feedback
soca_watch_co
great item and fast shipping thanks
Miguel007_197
Exactly as described A++
lindsey5102
Arrived before expected and was just as described! Thanks so much!!
