Price: 2,522.00 USD
1978 – 1988 G Body 9 INCH REAR END KIT TRAC LOC COMPLETE WITHOUT BRAKES
1978-88 GM G-body vehicles: Malibu, Monte Carlo, Monte Carlo SS, El Camino, Regal, Grand National, Cutlass, Cutlass 442, Cutlass Salon, Grand Prix, Caballerro and Station Wagons
Wheel mounting flange to wheel mounting flange will be 58″ Track width with axles installed
PLEASE SPECIFY IF YOU ARE RUNNING DISC OR DRUM BRAKES!
CHOOSE:
GEAR RATIO
REAR END YOKE SIZE AND
BOLT PATTERN
DRAIN PLUG (NONE OR 3/4 NPT IF REQUESTED WHEN YOU ORDER)
CHOOSE Big Ford Housing Ends; New Style (torino) with .375″ (3/8″) bolt holes OR Big Ford Old Style ends .500″ (1/2″)
SPECIFY if you are running drum or disc brakes (brakes not included)
SPECIFY 2 3/8″ or 2 1/2″ axle offset for brakes
**********( WE CAN NOT BUILD UNTIL THE ABOVE OPTIONS ARE CHOSEN!!!)************
- Ford 9 Inch for
A Body New Flanged Housing 58″ Stock pinion Location with Big Ford New Style Housing Ends. 78-88 GM Midsize Cars.
Wheel mounting flange to wheel mounting flange will be 58″ Trackk width with axles installed (2 1/2″ offset axles)
- Stock rear end pinion yoke location between wheel flanges when center section is installed.
- Standard driveshaft location 1/2″ to the passenger side exactly like a General Motors rear.
- New Stamped Housing with new 3″ x .188″ wall DOM tubing.
- Big Ford New Style (torino) housing ends with .375″ (3/8″) bolt holes
- new studs installed in housing
Nodular Iron Trac Loc Center Section 9″ Ford with 31 spline US Gear ring & pinion, Assembled.
The Center Section will be Assembled and set up for Street by Professionals.
ALL NEW UNIT!
- Nodular Iron Gear case and Nodular iron Stock size Pinion Support.
- 9 inch Ford US GEAR 8620 Street Series Ring & Pinion (ratios 325, 350, 370, 389, 4.11 or 4.30) .
- 2.89″ OD Bearing size x 1.78” ID bearing surface. nodular iron 5 bolt pinion support.
- CHOOSE Rear End Yoke: choose 1310 series (3 7/32″ wide with 1 1/16″ cap OD) or 1330 series 3 5/8″ wide with 1 1/8″ cap OD) rear end yoke.
- 9 inch Ford PEM 31 spline Trac Loc Carrier (posi clutch style unit) must use bottle of friction modifier in your lube
Package includes: PEM nodular iron case, iron pinion support, pinion bearings & races, pinion bolts, pinion depth shims, pinion seal, pinion nut, side bearings & races, premium ring gear bolts, tail bearing and tail bearing retainer plate.
All bearings and seals are Premium Brands ( either Timken or Koyo).
Also comes with big housing gasket, u-bolts for yoke and 4 ounce bottle of friction modifier.
We will build this center section after you verify the ratio of ring & pinion and the yoke series you want.
WARNING: Cancer And Reproductive Harm-
THIS WILL BE SHIPPED BY TRUCK FREIGHT TO A COMMERCIAL ADDRESS. MUST HAVE A LOADING DOCK OR A FORK LIFT.
Item specifics
-
Condition
-
-
Modified Item
-
No
-
Manufacturer Part Number
-
STFHNM290290-TL
-
Custom Bundle
-
No
-
Non-Domestic Product
-
No
-
Brand
-
PEM
